QuadraVista QF Manual
80
Appendix C. Keyboard Commands
The QuadraVista QF supports two hotkey modes – Multiple Keys and Double Click. These hotkey modes are
described further below. The hotkey mode can be selected in the OSD from the
SYSTEM / HOTKEY
menu
item as shown on page 16.
In Multiple Keys mode, the hotkey and the command key are pressed simultaneously. This is the default
hotkey mode.
Command = Hotkey
and
together
The following keys can be selected as hotkeys for Multiple Keys mode.
The default hotkey is
=
+
Other examples for Multiple Keys hotkeys are as follows.
=
+
+
=
+
=
In Double Click mode, the hotkey is double-clicked, and then the command key is pressed within two seconds.
Command =
and
in sequence
The following keys can be selected as hotkeys for Double Click mode.
Some examples of Double Click hotkeys are as follows.
=
=
Notes:
1. When the QuadraVista QF is in command mode (hotkeys are activated), the LEDs on the keyboard will
flash to indicate this.
2. In Double Click hotkey mode, pressing an invalid key causes the unit to exit command mode.
3. Hotkey =
when the OSD is open.
