Rose electronics Orion X OXC-08-GBIC/8FM Скачать руководство пользователя страница 88

Страница: 88 / 140

Orion X Installation and Operations Manual

Extender Update

The firmware of the extenders connected to the matrix can be updated in this screen. Extender update can be

performed only in the Java Tool.

Preparation

Take the following steps in order to prepare for the extender update.

1. Save the matrix configuration externally.

2. Open

Extras > Options

in the menu bar, and enter the path to the firmware update files in the

Firmware Directory

setting. Click the

Okay

button to confirm the path.

3. Connect all spare extenders to the matrix.

Note:

To preserve network stability, the extender update should not be performed over a WLAN.

Performing the Update in Standard Mode (Parallel Update)

1. Select

Administration > Update EXT Firmware

in the task area. The standard mode for parallel

update will be selected by default, and the

Upload Firmware (Step 1)

tab will be opened.

Figure 74. Extender Update in Standard Mode through the Java Tool - Step 1 (Upload Firmware)

2. Before the actual update process can begin, all firmware files have to be uploaded to the respective I/O

boards of the extenders that have to be updated. If a newer firmware is available, the appropriate I/O

boards will be automatically selected for upload in the

Selected

column and highlighted in green.

3. Start the upload and distribution of the update files by pressing the

Upload

button.

Notes:

While performing the upload process, no update files are installed. The update process is

performed after uploads are completed.

Unless all I/O cards are selected, the upload of the update files will be performed in sequence.

4. The successful completion of the upload process will be confirmed by a pop-up. Proceed to the actual

update process by clicking the

Yes

button. The Java Tool will automatically open the

Update Firmware

(Step 2)

tab.

Note:

To update with a firmware identical to or older than the version currently installed, enable the

Force Update

option in the lower part of the working area.

Содержание Orion X OXC-08-GBIC/8FM













































































































































Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды

Rose electronics Orion X OXC-08-GBIC/8FM, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды