Rose electronics Orion X OXC-08-GBIC/8FM Скачать руководство пользователя

Страница: 21 / 140

Orion X Installation and Operations Manual

Set user-defined 'Hot Key'

When setting a user-defined 'Hot Key' (e.g. 2x<Space>), ‘Hot Key’ Code 0 is used. For example, to set

<Space> as the ‘Hot Key’, the following keyboard sequence would be used:

<current 'Hot Key'>, <c>, <0>, <Space>, <Enter>.

Set ‘Hot Key’ for direct OSD access

Besides using the ‘Hot Key’ for standard functions, a ‘Hot Key’ can be set up to directly access the OSD.

To use one of the pre-defined ‘Hot Key’ Codes (Codes from 2 to 8) from the table above, use the following

keyboard sequence:

<current 'Hot Key'>, <f>, <'Hot Key' code>, <Enter>.

To specify a user-defined ‘Hot Key’ like 2x<Space>, use the following keyboard sequence:

<current 'Hot Key'>, <f>, <0>, <Space>, <Enter>.

Reset ‘Hot Key'

In order to set a ‘Hot Key' back to the default settings of the extender, press the key combination

<Right Shift>+<Del> within 5 seconds after switching on the CON unit or plugging in a keyboard.

Control Options

The Orion X contains an internal CPU that allows control of all functions from any console without the need for

an external CPU.

The following methods are available to configure and/or operate the Orion X:



through the OSD



through the Java Tool



through the serial interface

Control through the OSD

The Orion X can be configured through the OSD (On-Screen-Display). The settings of the

Configuration

are described below. All other menus are described in later chapters.

Entering the OSD

1. Start Command Mode with the 'Hot Key' (default: 2x <Left Shift>).

2. Press <o> to open OSD. If the

Enable CPU Selection

option is enabled in the

Configuration

screen,

a selection list for switching between available CPU Devices is displayed. In that case, press <F7> to

go to the OSD main menu.

Leaving the OSD



Press <Esc> in the main menu, or <Left Shift> + <Esc> from any OSD menu.

The OSD will be closed without any further changes and the currently active CPU connection will be displayed.

Содержание Orion X OXC-08-GBIC/8FM













































































































































Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды

Rose electronics Orion X OXC-08-GBIC/8FM, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды