Rose electronics Orion X OXC-08-GBIC/8FM Скачать руководство пользователя

Страница: 54 / 140

Orion X Installation and Operations Manual

USB 2.0 Extender

This section describes how to configure and use USB 2.0 extenders. USB 2.0 extenders must be connected to

standard I/O boards. They can be configured for independent switching, or can be assigned to existing KVM

extenders. USB 2.0 extenders can be configured through the OSD or the Java Tool.

Configuring USB 2.0 Extenders through the OSD

Select

Configuration > EXT Units

in the main menu.

Figure 40. Configuring USB 2.0 Extenders through the OSD

To create a USB 2.0 extender definition through the OSD, proceed as follows:

1. Press the

New

button. An extender with an eight-digit ID will be created, starting with digit 9.

2. Assign an appropriate name to the extender in the

Name

field.

3. Enter the I/O port number where the USB 2.0 extender unit is connected to the matrix into the

Port

field.

4. To configure the extender as a CON Unit, set the

USB-CON

(

standalone

) option to

(

C#1

Input

Signals)

and confirm by pressing the

Okay

button.

5. To configure the created extender as a CPU Unit, set the

USB-CPU

(

standalone

) option to

(

C#1

Output Signals

), and confirm by pressing the

Okay

button.

6. To create an individually switchable device for the USB 2.0 CON extender, select

Configuration >

CON Devices

and click the

New R

button.

Alternatively, the USB 2.0 CON extender can be assigned to an existing CON Device. To do this, select

the device, and move the USB 2.0 CON extender from the

EXT available

field into the

EXT assigned

field.

7. Give an appropriate name to the new Device in the

Name

field.

8. Repeat steps 6 and 7 for all USB 2.0 CPU extenders in the

Configuration > CPU Devices

menu.

9. If parallel operation is used within the matrix, set the

Release Time

in the

Configuration > Switch

screen to 10 s or more.

10. Restart all I/O boards on which USB 2.0 extenders have been configured, or alternatively restart the

matrix.

The USB 2.0 extenders are now configured and can be used.

Содержание Orion X OXC-08-GBIC/8FM













































































































































Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды

Rose electronics Orion X OXC-08-GBIC/8FM, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды