Rose electronics Orion X OXC-08-GBIC/8FM Скачать руководство пользователя страница 10

Страница: 10 / 140

Orion X Installation and Operations Manual

About This Manual

This manual covers the installation, configuration, and operation of the Orion X system. The system consists of

three components; the Orion X switch, the CPU device(s), and the CON device(s). This manual only covers the

Orion X switch. The Installation section explains how the three components are interconnected to form a

seamless switching network. The Operations section describes how to operate the system and the features

available to make switching and maintenance simple and easy.

Features



Extend KVM stations and computers up to 460 feet (140m) on either side of the matrix through CATx

cable, up to 3,280 feet (1 km ) using multi-mode fiber, or 32,808 feet (10 km) using single-mode fiber



Supports resolutions up to 1920 x 1200 @ 60Hz and all DVI Single Link resolutions including

High-definition 1080p or 2K



Intuitive OSD for easy use and configuration at each user station



Each port on the Orion X will automatically be configured as an input or output depending on the type of

device that is connected. If a CPU device is connected, the port becomes an input. If a CON device is

connected, the port becomes an output.



Scalable chassis allows for addition of more I/O cards as the system grows (additional cards in

increments of ports)



Switch between video sources of the same resolution instantly with no delay or display blanking



Can handle mixed signals including:

DVI or VGA inputs

Transparent USB 2.0

USB HID

PS/2

Serial

Analog or Digital audio



Orion X units can be cascaded or stacked to build larger systems



Matrix grid allows combining Orion X units into larger systems with redundant connections



Multi-Screen Control provides for configuring extenders with multiple displays so that they can be

seamlessly blended to function as one giant display



Redundant, load sharing power supplies in all models



Rack-mountable – 19” / 9U



Five optional firmware bundles are available for extra functionality:

Extended Switching and Presets added to the Java Tool

Extended Switching and Presets added to the Java Tool and additional API

SNMP and Syslog for unit monitoring

Matrix Grid

Multi-Screen Control

Содержание Orion X OXC-08-GBIC/8FM













































































































































Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды

Rose electronics Orion X OXC-08-GBIC/8FM, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды