Rose electronics Orion X OXC-08-GBIC/8FM Скачать руководство пользователя

Страница: 55 / 140

Orion X Installation and Operations Manual

Configuring USB 2.0 Extenders through the Java Tool



Select

Definition > EXT Units

in the task area.

Figure 41. Configuring USB 2.0 Extenders through the Java Tool

To create a USB 2.0 extender definition through the Java Tool, proceed as follows:

1. Press the

New Unit

button. This opens a pop-up window.

2. From the

Templates

in the selection box, select

USB 2.0 CON Unit

USB 2.0 CPU Unit

and click the

OK button. An extender with an eight-digit ID will be created, starting with digit 9.

3. Enter an appropriate name for the extender in the

Name

field.

4. Enter the port number of the matrix where the USB 2.0 extender is physically connected into the

Port

field.

5. Confirm the settings by pressing the

Apply

button.

6. The USB 2.0 CON extenders now have to be assigned to either an existing CON Device in the

Definition > CON Devices

screen, or a new CON Device has to be created for the assignment by

pressing the

New

button.

7. The USB 2.0 CPU extenders now have to be either assigned to an existing CPU Device in the

Definition > CPU Devices

screen or a new CPU Device has to be created for the assignment by

pressing the

New

button.

8. If parallel operation is used within the matrix, set the

Release Time

in the

Configuration > Switch

screen to 10 s or more.

9. Restart all I/O boards on which USB 2.0 extenders have been configured, or restart the matrix.

The USB 2.0 extenders are now configured and can be used.

Notes:

Created extender units are always set as fixed port extenders. This configuration is necessary to enable

switching USB 2.0 connections through the matrix.

To make a fixed port available again for Flex-Port extender units after deleting a fixed port extender unit,

restart the I/O board.

Содержание Orion X OXC-08-GBIC/8FM













































































































































Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды

Rose electronics Orion X OXC-08-GBIC/8FM, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды