Rose electronics Orion X OXC-08-GBIC/8FM Скачать руководство пользователя страница 42

Страница: 42 / 140

Orion X Installation and Operations Manual

Network

This menu contains the network configuration settings. It can be accessed in the OSD and the Java Tool.

The following Network settings can be modified.

Field

Selection

Description

DHCP

Activated

The network settings are automatically supplied by a DNS server

Note:

If DHCP is activated and there is no physical network connection

available, matrix boot time might increase.

Deactivated Function not active (default)

IP address

Byte

Enter the IP address to be used when DHCP is inactive (default:

192.168.100.99)

Subnet Mask

Byte

Enter the subnet mask to be used when DHCP is inactive

(default: 255.255.255.0)

Gateway

Byte

Enter the gateway address in the form "192.168.1.1", to be used when

DHCP is inactive

API Service

Activated

LAN interface of the Orion X activated for access via Java Tool (API

service port 5555) (default)

Deactivated Function not active

FTP Server

Activated

FTP server for transmission of configuration files activated (default)

Deactivated Function not active

Syslog

Activated

Enable Syslog Messages for status reporting (license key required)

Deactivated Function not active (default)

Syslog Server

Byte

Enter the Syslog server’s IP address in the form “192.168.1.1”

Trace

DEB

Activate debug messages in Trace (default: NO)

Note:

The debug messages are exclusively for matrix diagnostics.

They should be activated only after consultation with Rose Electronics.

Otherwise, increased data traffic might limit the performance of the

equipment.

INF

Activate information messages in Trace (default: NO)

NOT

Activate notification messages in Trace (default: YES)

WAR

Activate warning messages in Trace (default: YES)

ERR

Activate error messages in Trace (default: YES)

Syslog

DEB

Activate debug messages in Syslog (default: NO)

Note:

The debug messages are exclusively for matrix diagnostics.

They should be activated only after consultation with Rose Electronics.

Otherwise, increased data traffic might limit the performance of the

equipment.

INF

Activate information messages in Syslog (default: NO)

NOT

Activate notification messages in Syslog (default: YES)

WAR

Activate warning messages in Syslog (default: YES)

ERR

Activate error messages in Syslog (default: YES)

If changes are made to network parameters, save the changes and restart Orion X to activate the changes.

Note:

Consult your system administrator before modifying the network parameters. Otherwise unexpected

results may occur, including failures with the network.

Содержание Orion X OXC-08-GBIC/8FM













































































































































Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды

Rose electronics Orion X OXC-08-GBIC/8FM, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды