– 73 –
mode and 10 minutes in exhaust mode. It is recommended that
this function be allowed to carry out its function completely. At
the end of the run-out time, the motor and the extraction tower
will automatically switch off and the tower will close.
6.5 Increase and decrease the power level
The extraction tower can be set to 8 power levels, with 3 intense
levels (6, 7 and 8).
Activate the intense levels when cooking food with a strong
smell or vapour. On higher flow rates, the extraction tower
works for a fixed period of time: 1 hour on position 6, and 6
minutes on position 7 and 8 if the device is set to exhaust mode.
After this time, the extraction tower switches back to position 5.
Adjusting the power level:
Increase the power
Display
Press
+
Brighter
LED(s)
Decrease the power
LED(s)
dim
Press
‐
6.6 Auto-stop
In order to ensure the extraction does not keep running, the
motor switches off and the extraction tower closes automatically
after 3 hours (if the controller has not been changed during
these 3 hours).
6.7 Locking the extraction tower
In order to prevent the extractor hood from being inadvertently
switched on, e.g. when cleaning the glass, the controls are locked.
Locking the extraction tower
Locking
Display
Hold finger on
for 3 seconds of the
extraction tower.
LED
lights up
Unlocking
LED
off
Hold finger on
for 3 seconds of the
extraction tower.
7 Cleaning indications
7.1 Cleaning indication for grease filter
�
Indication: LED next to
lights
After 20 cooking hours, the LED next to the
symbol will
light up.
�
Follow the cleaning instructions as described in the
chapter, Cleaning.
After having cleaned and replaced the grease filters, reset the
cleaning indication.
Reset: press the
control key for 3 seconds when the
extraction tower is completly downwards.
7.2 Replacement indicator recirculation filter
(only with recirculation)
�
Indication: LED next to
lights
AAfter a fixed time, the LED on the hood touch will light up. This
indicates that the recirculation filter needs to be replaced.
�
Follow the cleaning instructions described in the
recirculation box / filter manual.
A new recirculation filter can be obtained from a specialist dealer
or from the Novy website. After replacing the recirculation filter,
reset the cleaning indication.
Reset: press the
control key for 3 seconds when the
extraction tower is completly downwards.
7.3 I/O module connection
The device can be optional equipped with the Input/Output
module n° 990036 (as of version v5).
When the input of the module is used in “closed” input situation
the extraction tower will move to the desired height only the
extraction will not start.
The 2 leds between the cleaning indication
and
will
blink.
The extraction only starts when the input situation is “open”.
The input can be used for example in combination with a
sinwow switch in duct out mode.
When the output of the module is used the relay will close when
the extraction is active.
The output remains closed also 5 minutes after closing the
extraction tower.
8 Cooking advice
Quality of the pots and pans
Suitable cookware, pots and pans include: steel, enamelled
steel, cast iron, stainless steel with magnetic base, aluminium
with magnetic base (±100mm min). Unsuitable pans include:
aluminium and stainless steel without magnetic base, copper,
brass, ceramics, porcelain. The manufacturers will state
whether their products are suitable for induction.
In order to ensure your pans are suitable:
–
Pour a little water in a pan and place it on an induction
cooking zone set to
9
. The water should be hot within a
few seconds.
1821_110131_GA1.indd 73
20/08/20 09:40
5.5 Öka och minska effektnivå
Fläkttornet kan ställas in till 8 effektnivåer, varav 3 är
intensiva nivåer (nivå 6, 7 och 8). Aktivera intensiv nivå
när det uppstår stark lukt eller ångbildning.
Fläkttornet kör sedan med högre effekt under en viss
period, för nivå 6 är detta 1 timme och för nivå 7 och 8 är
detta 6 minuter om apparaten är inställd på utsugsläge.
När tidsperioden är över, återvänder tornet till position 5.
Justera effektnivån
Tryck
Tryck
Reducera effekten
Öka effekten
5.6 Auto-stopp
För att undvika att fläkten går utan att stanna så kommer
den automatiskt att stänga av sig själv efter 3 timmar (om
inga förändringar gjorts på kontrollpanelen).
6.1 Rengöringsräknare fettfiltre
Följ rengöringsinstruktionerna som beskrivs
under “Rengöring”.
Indikator: Vit LED bredvid tänds
Efter 20 timmars användning börjar den
vita lampan bredvid symbolen att lysa.
Efter rengjöringen satts fettfiltrene på plats, starta om
rengöringsräknaren igen.
Omstart: Håll ned knappen i 3 sekunder.
7. RÅD OM MATLAGNINGEN
Pannans kvalitet
Material som skall användas: stål, emaljerat stål, gjutjärn,
ferromagnetiskt rostfritt stål, aluminium med ferromagne-
tisk botten.
Material som inte kan användas: aluminium och rostfritt
stål utan ferromagnetisk botten, koppar, mässing, glas,
keramik, porslin. Tillverkaren kommer att ange om pro-
dukterna är lämpliga för induktion eller inte
För att kontrollera om en panna är kompatibel gör du
följande:
• Lägg lite vatten i en panna och placera det på en
induktionsplatta som är inställd på nivå [9]. Vattnet bör
värmas inom några sekunder.
och 10 minuter i avgasläge. Det rekommenderas att denna
funktion får utföra sin funktion helt. I slutet av körtiden
stängs motorn och utsugstornet av automatiskt och tornet
stängs.
5.7 Låse fläkttårnet
För att förhindra att fläkten slås på av misstag, t.ex. vid
rengöring av glaset, är kontrollerna låsta.
Låsning fläktstornet
Upplåsning
Låsning
Håll fingret på i 3 sekunder på fläkttornet
Håll fingret på i 3 sekunder på fläkttornet
6 Rengöringsindikationer
6.2 Ersättningsindikator, cirkulationsfiltret (en-
dast med återcirkulation)
Indikator: LED bredvid tänds
Efter en fast tid tänds lysdioden på huven. Detta indi-
kerar att återcirkulationsfiltret måste bytas ut.
Följ rengöringsinstruktionerna som beskrivs i
recirkulationsbox / manual
Ett nytt återcirkulationsfilter kan erhållas från en återförsälja-
re eller från Novys webbplats. När du har bytt ut återcirkula-
tionsfiltret, återställ rengöringsindikationen.
Återställ: tryck på kontrollknappen i 3 sekunder när
utsugstornet är helt nedåt.
6.3 I/O-modulanslutning
Enheten kan valfritt utrustas med in- / utgångsmodul nr
990036 (från version v5) rengöringsindikationen.
När ingången på modulen används i ”sluten” ingångssi-
tuation, flyttas extraktionstornet till önskad höjd bara så att
extraktionen inte startar.
De 2 lysdiodarna mellan rengöringsindikatorn och
blinkarn startar.
Extraktionen börjar bara när inmatningssituationen är ”öp-
pen”.
Ingången kan användas till exempel i kombination med en
omkopplare i kanal ut-läge.
Utgångs förblir stängd också 5 minuter efter stängning av
fläkttornet.
När utgången från modulen används kommer reläet att stän-
gas när extraktionen är aktiv.
- 28 -
Содержание NOVY PANORAMA POWER 1821
Страница 2: ...NO Bruksanvisning 5913 Panorama Pro 1821 110131 GC1...
Страница 18: ...NO Bruksanvisning 5913 Panorama Pro 1821 110131 GC1 18 SE Anv ndarmanual...
Страница 34: ...34 NO Bruksanvisning 5913 Panorama Pro 1821 110131 GC1 DK Brugermanual...
Страница 50: ...50 NO Bruksanvisning 5913 Panorama Pro 1821 110131 GC1 EN User Manual...