Instalattion and operating manual: MGSM 5.0/MGSM 5.0-PS v.1.8S EN
Marking the RETURN ACKNOWLEDGEMENT option will cause that every command sent with the use
of the access code will be acknowledged by a returned SMS confirming a correctly accomplished
operation.
Hence, a remote change of the ACCESS CODE by using an SMS command is possible.
e.g.
xxxx CODE yyyy
where: xxxx – present access code (e.g. adam), yyyy – new access
code (e.g. 1234)
(example: adam code 1234)
Remarks:
•
capital and small letters are distinguished,
•
do not enter national characters, missing access code will prevent: output
control, „test on demand”, change of code function access.
6.5.6 INCOMING CALLS
This option enables module reaction time setting to
incoming calls, which are listed as “Telephone numbers”.
•
DO NOT REACT
– module does not take any
action
•
REJECT AND CALL BACK AFTER
– incoming
call will be rejected after set time [s], and the
CLIP will be performed to the calling number.
•
REJECT AFTER
– the incoming call will be rejected after a set time [s].
•
RECEIVE AFTER
– the incoming call will be received after a set time [s]. If a speech
synthesizer is connected, the message will be played
Remarks:
●
the connection time is counted from the first ring detection
●
incoming calls from other numbers are immediately rejected.
30
