Instalattion and operating manual: MGSM 5.0/MGSM 5.0-PS v.1.8S EN
length of the SMS message is 20 characters. Do not use special characters (for example:
letters of the Polish alphabet).
6.3.3 SEND SMS TO / CALL:
This tab enables the flexible determination of the telephone numbers to which an SMS
message and/or voice message is to be sent. Mark with the cursor the intersection of the
input number and telephone number in the SEND SMS TO and CALL tabs.
For example, a sample configuration can be:
- Violation and/or return of I1 will result in: sending an SMS message and activating a voice
connection with telephone number 1.
- Violation and/or return of I2 will result in: sending an SMS message and activating a voice
connection with telephone numbers 1 and 2.
- Violation and/or return of I3 will result in: sending an SMS message to telephone number 2
and activating a voice connection with telephone number 1.
Remarks:
•
If the user presses (on during a call ) the # key on keyboard DTMF queue will
be cleared to the other phone numbers!!
6.4 OUTPUTS
The module outputs configuration is performed in this bookmark. Output control
can be performed via SMS messages, CLIP (short telephone connections, so-called
“ring”), events in the system e.g. ALARM, logical functions: AND, OR, NOR, XOR etc.
The module main board contains the following:
•
one high current input O1, electronically protected against overload
•
three low current OC outputs O2, O3, O4
22
