ROOTECH ACCURA 7500, Руководство пользователя, Страница: 23 / 76

Page 23
Starting Address indicates the Starting Address for the data to be set. Word Count indicates the
number of data to be set, and Byte Count is twice the Word Count.
Example]
Writes data1[78hex] and data2[0xA] to the PT ratio [address 40053] and CT ratio [address 40054]
of the relay 1.
Slave address = 1, starting address = 34, word count = 2, byte count = 4, crc high = F1, crc low
= 56
Slave Function Starting Address Word Count Byte Count Data Word1
01 10 00 34 00 02 04 00 78
Data Word2 Error Check
00 0A F1 56
Response
Slave Function Starting Address Word Count Error Check
10
1 byte 1 byte 2 bytes 2 bytes 2 bytes
Example]
The response to the above request packet is as follows.
Slave Function Starting Address Word Count Error Check
01 10 00 34 00 02 00 06
Reserved Registers
In the address map section, there are reserved registers. When reading reserved registers, arbitrary
values are provided. When writing a specific value, the value is not applied.
Invalid Registers
When reading and writing the invalid register, exception response[exception code 02] is made.