manualshive.com logo in svg

Roland XP-60, Руководство пользователя

Получите бесплатное Руководство пользователя Roland XP-60 на нашем сайте. Этот мануал поможет вам максимально раскрыть потенциал вашего синтезатора XP-60. Скачайте его с нашего сайта прямо сейчас, чтобы легко настраивать и использовать этот замечательный инструмент.

Поделиться
Скачать
background image

Coarse Tune (Part coarse tune)

Adjusts pitch of each Part in semitone steps (-4– +4 octaves).
The pitch will change relative to the pitch specified for the
Patch as being 0.

Fine Tune (Part fine tune)

Adjusts the pitch specified for the Coarse Tune parameter in
1-cent (1/100th of a semitone) steps (-50– +50 cents). 

Octave Shift 

Adjusts pitch for each Part in 1-octave steps (-4– +4 octaves).
The pitch will shift relative to the pitch specified for the
Patch as being 0. 

Voice Reserve

This setting determines how many voices will be reserved
for each Part when more than 64 simultaneous voices are
requested. 

✳

You can set any Voice Reserve value until the total of
all Parts reaches 64 voices. The number of remaining
voices available is indicated at the right of the parame-
ter name (rest). Refer to this when you make settings.

Making MIDI settings for a Part (MIDI)

Part MIDI display

Use this display to determine how each Part will transmit
and receive MIDI messages.

Channel (MIDI channel)

Specifies each Part’s MIDI channel.

✳

If you set this to the same channel as specified by the
Perform Ctrl-Ch parameter (SYSTEM/MIDI/MIDI
Param 1), Control Channel selection will take priority.
Trying to use Program Change messages to select
Patches will select Performances instead. In order to
select Patches, change the Perform Ctrl-Ch parameter
(SYSTEM/MIDI/MIDI Param 1) to a different setting. 

Rx Switch (Receive switch)

Specifies whether each Part is to receive MIDI messages
(ON) or not (OFF). Set OFF, and the Part will respond to the
keyboard, but not to the internal sequencer or external MIDI
devices. This is normally left ON, but you set it OFF when
you don’t want a specific Part to be playing during a song
playback.

✳

This setting can also be switched using Rx Switch para-
meter in the Local/Tx/Rx window.

Tx Switch (Transmit switch)

Specifies whether you want each Part to transmit MIDI mes-
sages from the controller section (ON) or not (OFF). At OFF,
the Part responds to the keyboard, but keyboard
Performance data (MIDI messages) will not be sent from

MIDI OUT. This is normally left ON, but you can set it OFF
when you don’t want the XP-80 to control external sound
sources. 

✳

This setting can also be switched using the Tx Switch
parameter in the Local/Tx/Rx window.

Local Switch 

Specifies whether you want to disconnect the controller sec-
tion from the internal sound source (ON) or not (OFF) for
each Part. At OFF, the keyboard will not play that Part, but
keyboard performance data (MIDI messages) will be sent
from MIDI OUT. This is normally left ON, but you can set it
OFF when you want the XP-80 keyboard and controllers to
only control external sound sources.

✳

This setting can also be switched using the Local Sw
parameter in the Local/Tx/Rx window.

Rx Prog Chg Switch (Receive program change switch)

Specifies whether you want each Part to receive MIDI
Program Change messages (ON) or not (OFF). 

Rx Volume Switch (Receive volume switch)

Specifies whether you want each Part to receive MIDI
Volume messages (ON) or not (OFF). 

Rx Hold-1 Switch (Receive hold 1 switch) 

Specifies whether you want each Part to receive MIDI Hold
1 messages (ON) or not (OFF). 

Tx Bank Select (Transmit bank select group)

When you select a Performance, the XP-80 will normally
transmit the Performance's Bank Select and Program num-
bers to external MIDI devices. If you set the Tx Bank Select
parameter to GROUP1–7, the Program number of the Patch
or Rhythm Set assigned to each Part as well as the Bank
Select number you've set on the Bank Select Group display
(SYSTEM/MIDI) will also be transmitted simultaneously.
This allows changing sounds on multiple external devices
(p.179). 

PATCH: 

When you select a Performance, only the Bank

Select and Program numbers of that Performance will be
transmitted to external MIDI devices. This setting should
normally be used. 

GROUP1: 

When you select a Performance, the Program

number of the Patch or Rhythm Set assigned to each Part
and the values set for <Grp 1>'s Bank LSB parameter and
Bank MSB parameter (SYSTEM/MIDI/Bank Select Group)
will be transmitted to external MIDI devices together with
the Performance's Bank Select and Program numbers. 

GROUP2: 

This setting works the same way as GROUP1, but

the Bank LSB parameter and Bank MSB parameter (SYS-
TEM/MIDI/Bank Select Group) values for <Grp 2> will be
transmitted to external devices, instead of <Grp 1>.

GROUP3: 

This setting works the same way as GROUP1, but

the Bank LSB parameter and Bank MSB parameter (SYS-
TEM/MIDI/Bank Select Group) values for <Grp 3> will be
transmitted to external devices, instead of <Grp 1>.

GROUP4: 

This setting works the same way as GROUP1, but

the Bank LSB parameter and Bank MSB parameter (SYS-
TEM/MIDI/Bank Select Group) values for <Grp 4> will be
transmitted to external devices, instead of <Grp 1>.

67

Chapter 3. Creating your own sounds

[PERFORM]

➞

[F4] (MIDI)

Содержание XP-60

























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для XP-60

Keithley 6430 Quick Results Manual preview
6430
Бренд: Keithley Страницы: 48
DAPAudio IEM-100 Beltpack User Manual preview
IEM-100 Beltpack
Бренд: DAPAudio Страницы: 19
Raycus RFL-A1000D Manual preview
RFL-A1000D
Бренд: Raycus Страницы: 40
RaycoWylie i4000 Calibration Instructions Manual preview
i4000
Бренд: RaycoWylie Страницы: 31
Orange Electronic P451 Manual preview
P451
Бренд: Orange Electronic Страницы: 21
Velleman DVR8T3 Quick Installation Manual preview
DVR8T3
Бренд: Velleman Страницы: 107
Aqua Lung PHODS Technical Manual preview
PHODS
Бренд: Aqua Lung Страницы: 24
Omega FPDM1000 User Manual preview
FPDM1000
Бренд: Omega Страницы: 20
Sekonic Litemaster Pro L-478DR Operating Manual preview
Litemaster Pro L-478DR
Бренд: Sekonic Страницы: 16
Paradyne FrameSaver SLV Series Installation Instructions Manual preview
FrameSaver SLV Series
Бренд: Paradyne Страницы: 39
Opus Technologies OP-FSM Installation And User Manual preview
OP-FSM
Бренд: Opus Technologies Страницы: 24
Hameg HZ540 Manual preview
HZ540
Бренд: Hameg Страницы: 40
Baker Hughes Panametrics XDP User Manual preview
Panametrics XDP
Бренд: Baker Hughes Страницы: 64
IROX PE-DRO Operating Instructions Manual preview
PE-DRO
Бренд: IROX Страницы: 8
Sagola Classic I 2 Instruction Manual preview
Classic I 2
Бренд: Sagola Страницы: 16
KEM RA-620 Operation Manual preview
RA-620
Бренд: KEM Страницы: 49
Vega VEGAWAVE Supplementary Instructions Manual preview
VEGAWAVE
Бренд: Vega Страницы: 20
Allen Organ Company ADC 3600 Owner'S Manual preview
ADC 3600
Бренд: Allen Organ Company Страницы: 29

Бренды по названию

Популярные бренды

Загрузить еще бренды