manualshive.com logo in svg

Roland XP-60, Руководство пользователя

Получите бесплатное Руководство пользователя Roland XP-60 на нашем сайте. Этот мануал поможет вам максимально раскрыть потенциал вашего синтезатора XP-60. Скачайте его с нашего сайта прямо сейчас, чтобы легко настраивать и использовать этот замечательный инструмент.

Поделиться
Скачать
background image

184

❚

Synchronizing to the VS-880 Hard
Disk Recorder

You can connect the XP-80 to the VS-880 and synchronize it
to the VS-880 so you can easily put together the song you
have created on the XP-80 with vocals or acoustic instrument
performance. In other words, by syncing to the VS-880, you
can create an audio track for the XP-80. Both the XP-80 and
VS-880 can serve as a controller, so you can easily synchro-
nize with vocals or your own acoustic instrument as you
play.

...........................................................................................................

<Connecting the XP-80 to the VS-880>

When synchronizing the XP-80 to the VS-880, the following
relationship will be established.

The XP-80 can control start and stop of song playback and
move to a different Song position in the song by transmitting
MMC commands to the VS-880. The VS-880 in turn controls
start and stop of the song playback and recording as well as
moving to a different Song position in the song by sending
MIDI messages to the XP-80. This makes it possible to per-
form loop play or punch-in recording that records only at a
specified point.

<MMC (MIDI Machine Control>

MMC is a protocol used to control tape recorders, video tape
recorders, digital recording systems and other recorders by
MIDI. Thirty seven MMC commands are available including
Stop and Play.

...........................................................................................................

Getting ready to sync to the VS-880

Setting parameters

To have the XP-80 sync to the VS-880, set the XP-80’s para-
meters as shown below. These parameters should be reset to
the original settings after synchronization is completed. 

MMC Output parameter (SEQ/Setup/SEQ System Setup)

When using the XP-80 to control the VS-880, put ON. When
using the XP-80 to be controlled by the VS-880, put OFF. 

✳

Actions cannot be carried out correctly when the VS-
880 controls the XP-80 with MMC Output parameter
ON.

Frame Mode parameter (SEQ/Setup/SEQ System Setup)

To match the XP-80’s frame rate with the VS-880’s, set this
parameter to the same value as the VS-880’s MTC Type para-
meter setting. If the VS-880’s MTC Type parameter is set to
29N, set this parameter to 30. 

✳

When connecting the XP-80 to the VS-880, it is recom-
mended to set both units’ parameters to 30.

Offset Time parameter (SEQ/Setup/SEQ System Setup)

To allow the XP-80 and VS-880 to locate the same Song posi-
tion, set this parameter to the same value as the VS-880’s Ofs
parameter setting. 

Recording the XP-80 song’s MIDI clock on the VS-
880’s sync track

To synchronize the XP-80 to the VS-880, you can either use
the VS-880’s sync track or tempo map. 

When synchronizing a song with a constant tempo from
song beginning to end or with just a minor tempo change,
you should create a tempo map before syncing. For details,
refer to the VS-880’s instructions. In this case, below men-
tioned procedures are not necessary.

When syncing a song containing gradual tempo changes
such as accelerandos or ritardandos, use a sync track. When
compared to the tempo map that sets tempo in measure
intervals, using the sync track makes it possible to follow
subtle tempo changes more accurately.

✳

Insert several blank measures at the beginning of the
VS-880 and XP-80 songs in order to avoid any sync
instability. 

<Procedure>

❶

Connect the XP-80 to the VS-880 via a MIDI cable as
shown below.

❷

Make sure that the Sync Mode parameter (SEQ/
Setup/SEQ System Setup) is set to INTERNAL, Sync
Output parameter (SEQ/Setup/SEQ System Setup) is
set to ON, MMC Output parameter (SEQ/Setup/SEQ
System Setup) is set to ON.

❸

Select the XP-80 song that you want to sync to the VS-880.

❹

Set the VS-880 parameters so that it can record a MIDI
clock on its sync track.

✳

For details, refer to the VS-880’s instructions.

❺

Press [STOP/PLAY] to play back the XP-80 song. 

As soon as the XP-80 song playback begins, the MIDI clock
will be recorded on the VS-880’s sync track. Once song play-
back ends, the VS-880 will stop the MIDI clock recording
automatically. 

XP-80

MIDI IN

MIDI OUT

MIDI OUT

MIDI IN

MIDI

MMC

VS-880

XP-80

MIDI OUT

MIDI IN

VS-880

Chapter 11. Getting the full potential of the XP-80

Содержание XP-60

























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для XP-60

TaiDoc L1 Owner'S Manual preview
L1
Бренд: TaiDoc Страницы: 31
Panasonic SXNP10 - DIGITAL PIANO Service Manual preview
SXNP10 - DIGITAL PIANO
Бренд: Panasonic Страницы: 63
LaserLine 310 Fitting And User Instructions preview
310
Бренд: LaserLine Страницы: 24
Nellcor OxiMax N-550 Operator'S Manual preview
OxiMax N-550
Бренд: Nellcor Страницы: 104
Valhalla Scientific 4300B Operation Manual preview
4300B
Бренд: Valhalla Scientific Страницы: 43
Varian CP-4900 Micro-GC Preinstallation Manual preview
CP-4900 Micro-GC
Бренд: Varian Страницы: 7
Vapotherm precision flow Quick Reference Manual preview
precision flow
Бренд: Vapotherm Страницы: 2
Yamaha THR30II Wireless Quick Manual preview
THR30II Wireless
Бренд: Yamaha Страницы: 2
A&D MX-50 Instruction Manual preview
MX-50
Бренд: A&D Страницы: 39
bmcm meM-INC Quick Start Manual preview
meM-INC
Бренд: bmcm Страницы: 5
Tektronix TAS 200 Instruction Manual preview
TAS 200
Бренд: Tektronix Страницы: 48
BizLine BIZ 780 312 Instruction Manual preview
BIZ 780 312
Бренд: BizLine Страницы: 62
janitza UMG 96RM-P Operating Instructions And Technical Data preview
UMG 96RM-P
Бренд: janitza Страницы: 128
ORANGE Crush PiX 50BXT Owner'S Manual preview
Crush PiX 50BXT
Бренд: ORANGE Страницы: 15
E+E Elektronik EE772 User Manual preview
EE772
Бренд: E+E Elektronik Страницы: 32
KALATEL CBR-KB3 Installation And Operation Manual preview
CBR-KB3
Бренд: KALATEL Страницы: 38
Datcon DT4120 PS Series Operating Instructions Manual preview
DT4120 PS Series
Бренд: Datcon Страницы: 92
LaserLine GL3000PM Owner'S Manual preview
GL3000PM
Бренд: LaserLine Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды