Roland MVS-12, Руководство пользователя

Страница: 20 / 40

20
Use As a Multi-Viewer
You can save the settings for the current display mode and the display locations to a MEMORY button.
1.
Make the settings for the display mode and the display locations.
Use the buttons on the front panel or use the mouse to save the current settings of the display mode and display locations for
recall later.
2.
Save the display mode and the display locations.
Press and hold for several seconds any of the [MEMORY] buttons from [1] to [4]. When saving to internal memory starts, all
[MEMORY] buttons flash. When the save operation finishes, the flashing stops.
fig.panel-preset.eps
3.
Call up the display mode and display locations.
Pressing the [MEMORY] button you pressed in step 2 calls up the saved state.
Displaying the MAIN MENU lets you use the mouse to call up saved values. Click any of the [MEMORY] buttons from [1] to [4] to call up the saved
state.
You can copy or reset values saved to MEMORY buttons. Refer to “Copying/ Resetting Values in Memory” (p. 33).
You can also use the mouse to save settings. At the MAIN MENU, select [UTILITY], then use the [MEMORY WRITE] item to choose the number of
the destination memory for saving. You can save the settings to the selected number by clicking the [WRITE] button.
fig.memory-write.eps
Saving Settings to MEMORY Buttons
MVS-12_e.book 20 ページ ２０１１年３月９日 水曜日 午後２時３３分