Roland MVS-12, Руководство пользователя

Страница: 29 / 40

29
Other Features
The MVS-12 can switch to NTSC or PAL at startup.
fig.NTSC-PAL-boot.eps
Switching to NTSC at Startup
At [MATRIX OUT], hold down [1] and turn on the power. This button flashes when the unit is switched to NTSC at startup.
* Once set to NTSC, the setting persists in memory even after power-off.
fig.NTSC-boot.eps
Switching to PAL at Startup
At [MATRIX OUT], hold down [2] and turn on the power. This button flashes when the unit is switched to PAL at startup.
* Once set to PAL, the setting persists in memory even after power-off.
fig.PAL-boot.eps
You can also use the menus to switch between NTSC and PAL. At the [SYSTEM SETTING] menu, for the [NTSC/PAL] item, select either [NTSC] or
[PAL]. After this operation, the setting requires few seconds to take effect.
Switching Between NTSC and PAL
PAL NTSC
MVS-12_e.book 29 ページ ２０１１年３月９日 水曜日 午後２時３３分