Roland LEC-300A Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 180

background image

To Ensure Safe Use

6

Incorrect operation may cause injury

WARNING

Be sure to follow the operation pro-

cedures described in this documenta-

tion. Never allow anyone unfamiliar

with the usage or handling of the

machine to touch it.

Incorrect usage or handling may lead to
an accident.

Keep children away from the ma-

chine.

The machine includes areas and compo-
nents that pose a hazard to children and
may result in injury, blindness, choking,
or other serious accident.

Never operate the machine while

tired or after ingesting alcohol or any

medication.

Operation requires unimpaired judg-
ment. Impaired judgment may result in
an accident.

Never use the machine for any pur-

pose for which it is not intended, or

use the machine in an undue manner

that exceeds its capacity.

Doing so may result in injury or fire.

For accessories (optional and con-

sumable items, power cord, and the

like), use only genuine articles com-

patible with this machine.

Incompatible items may lead to an ac-
cident.

Before attempting cleaning, mainte-

nance, or attachment or detachment

of optional items, disconnect the

power cord.

Attempting such operations while the
machine is connected to a power source
may result in injury or electrical shock.

WARNING

Never attempt to disassemble, repair,

or modify the machine.

Doing so may result in fire, electrical
shock, or injury. Entrust repairs to a
trained service technician.

CAUTION

Exercise caution to avoid being

pinched or becoming caught.

Inadvertent  contact  with  certain  areas
may  cause  the  hand  or  fingers  to  be
pinched  or  become  caught.  Use  care
when performing operations.

Never attempt operation while wear-

ing a necktie, necklace, or loose cloth-

ing. Bind long hair securely.

Such items may become caught in the
machine, resulting in injury.

Conduct operations in a clean, bright-

ly lit location.

Working in a location that is dark or clut-
tered may lead to an accident, such as
becoming caught in the machine as the
result of an inadvertent stumble.

Never climb or lean on the machine.

The machine is not made to support
a person. Climbing or leaning on the
machine may dislodge components and
cause a slip or fall, resulting in injury.

Caution: cutting tool.

This machine has an internal tool. To
avoid injury, handle the tool with care.

«
...
6
7
8
9
10
...
»

Содержание LEC-300A





















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LEC-300A

Бренд: LEGRAND Страницы: 12

Бренд: Ricoma Страницы: 25

Бренд: PSL Страницы: 4

Бренд: Cutok Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды