Roland LEC-300A Скачать руководство пользователя страница 23

Страница: 23 / 180

Important Notes on Handling and Use

Ink Cartridges

Ink cartridges come in various types.



Use a type that is compatible with the printer. Also, be sure to use only genuine items

from Roland DG Corp.

Never subject to impact or attempt to disassemble.



Never drop or shake forcefully. The impact may rupture the internal pouch and cause

the ink to leak.



Never attempt to disassemble.



Never attempt to refill the ink.



If ink gets on your hands or clothing, wash it off as soon as possible. Removal may

become difficult if allowed to stand.

Storage



Use up the ink before the expiration date printed on the ink cartridge.



Store the ink cartridge in a location avoiding direct sunlight or strong illumination.



Store the ink cartridge unopened in a well-ventilated location at a temperature of over

5˚C (41˚F) and under 35˚C (95˚F) and relative humidity of 20 to 80%.



Once opened, store the ink cartridge in the sealed original (shading) bag.

Содержание LEC-300A





















































































































































































Результаты поиска

Содержание LEC-300A

Отзывы:

Похожие инструкции для LEC-300A

Бренды по названию

Популярные бренды

Roland LEC-300A, Руководство пользователя

Результаты поиска

Содержание LEC-300A

Отзывы:

Похожие инструкции для LEC-300A

Бренды по названию

Популярные бренды