72
Chapter 7 Other Features
Limiting the Banks That Can
Be Switched (Bank Extent)
By setting an upper limit to the banks, thus limiting the range
of banks that can be switched, you can set the GT-8 so that
only the patches you need can be selected.
fig.07-161
1.
Press [SYSTEM], then press PARAMETER [
]
[
] so that “SYS: BANK Extent” is displayed.
fig.07-170d
2.
Rotate the PATCH/VALUE dial to set the upper limit
for the banks.
Valid Settings: 1–85
3.
Press [EXIT] to return to the Play screen.
Setting the Timing Used for Switching
Patches (Bank Change Mode)
This sets the timing with which the GT-8 switches to the next
patch when switching patches with the pedals.
fig.07-171
1.
Press [SYSTEM], then press PARAMETER [
]
[
] so that “SYS: Bnk Chg Mode” is displayed.
fig.07-180d
2.
Rotate the PATCH/VALUE dial to set the timing for
switching patches.
3.
Press [EXIT] to return to the Play screen.
1
2
1
3
Value
Explanation
Immediate
The patch switches instantly when a
BANK pedal or any of the number pedals
is pressed.
Wait for a NUM.
Although the indication in the display is
updated to reflect the change in the bank
when a BANK pedal is pressed, the patch
will not change until a number pedal has
been pressed.
1
2
1
3
GT-8_e.book 72 ページ ２００７年６月２９日 金曜日 午後３時５５分
