56
Chapter 5 Using Pedals to Control the Effects
Setting the Operation of an External
EXP Pedal (Sub EXP Pedal Function)
This sets the function of the external expression pedal (such
as an EV-5) connected to the SUB EXP PEDAL/SUB CTL1,2
jack on the rear panel.
fig.05-009
1.
Press [SYSTEM], then press PARAMETER [
]
[
] so that “Sub EXP Func” is displayed.
fig.05-040d
2.
Use the PATCH/VALUE dial to select the external
expression pedal function.
3.
Press [EXIT] to return to the Play screen.
Setting the Operation of the CTL Pedal, EXP
Pedal Switch, and EXP Pedal (Assign CTL/EXP)
Set the functions of the CTL pedal, EXP pedal switch, and
EXP pedal with “Assign CTL/EXP.”
* Set the CTL Pedal/EXP Switch/EXP Pedal (p. 54), Sub
CTRL1,2 (p. 55), and Sub EXP Pedal (p. 56) settings to
“Assignable” (or “Auto”).
* The EXP pedal functions as a foot volume pedal.
fig.05-049
1.
Press ASSIGN [CTL/EXP], then press PARAMETER
[
] [
] to display the following screen.
CTL Pedal
fig.05-050d
EXP Pedal Switch
fig.05-060d
EXP Pedal
fig.05-070d
2.
Rotate the PATCH/VALUE dial to change the setting’s
value.
3.
Press [EXIT] to return to the Play screen.
4.
To save the settings, use the Write procedure (p. 22).
Value
Explanation
Assignable
The pedal is used as the controller set in As-
sign (p. 56, p. 57) for each patch.
Foot Volume
The pedal functions as a “foot volume” pedal.
Patch Level
The pedal is used as the patch level controller.
Pedal Wah
The pedal is used as a “pedal wah” pedal
when Pedal Wah is switched on.
Pedal Bend
The pedal is used as a “pedal bend” pedal
when Pedal Bend is switched on.
1
2
1
3
1
2
1
3
GT-8_e.book 56 ページ ２００７年６月２９日 金曜日 午後３時５５分
