Roland GT-8 Скачать руководство пользователя страница 25

Страница: 25 / 108

Chapter 3 Saving the Tones You Have Created

Chapter

Press ASSIGN [VARIABLE] several times in order to
select the save-source Assign Variable number you wish
to save the settings.

* For PREAMP/SPEAKER, the setting in currently chosen

channel set by Channel Select (p. 26) will be saved.

* For FX-1/FX-2, the settings in currently chosen effects set by

FX1/FX2 Select (p. 34, p. 43) will be saved.

Use the PATCH/VALUE dial to select the destination
for the settings.

When you want to change the User Quick Setting name
(12 characters), use PARAMETER [

] [

] to

move the cursor, and use the PATCH/VALUE dial to
change the characters.

fig.03-120d

You can use the following functions when changing text
characters.

Press [WRITE].

The settings are saved, and the Play screen returns to the
display.

Copying the PREAMP/SPEAKER

Settings to Another Channel

You can take the PREAMP/SPEAKER settings for one
channel and copy them to another channel.

fig.03-130

Press [CHANNEL A] or [CHANNEL B] to select the
copy-source channel.

Press [WRITE].

Press [CHANNEL A] or [CHANNEL B] to select the
copy-destination channel.

You can alternatively rotate the PATCH/VALUE dial to
change the copy-destination channel.

The channel copy screen appears in the display.

* If you press the button for the same channel as the copy source,

a channel other than the copy-source channel is selected for the
copy destination.

fig.03-140d

* To cancel the copy, press [EXIT]. The Play screen returns to

the display.

Press [WRITE].

The settings are copied, and the Play screen returns to
the display.

If you want to keep a tone for which you have made
settings, use the “Write procedure” (p. 22) to save it to a
User patch.

Button

Function

INS

Inserts a blank space at the cursor posi-
tion.

DEL

Deletes the character at the cursor posi-
tion and shifts the characters following it
to the left.

CAPS

Switches the character at the cursor posi-
tion between upper and lower case.

2,4

1,3

Copy-source channel

Copy-destination channel

GT-8_e.book 25 ページ２００７年６月２９日　金曜日　午後３時５５分

Содержание GT-8













































































































Результаты поиска

Содержание GT-8

Отзывы:

Похожие инструкции для GT-8

Бренды по названию

Популярные бренды

Roland GT-8, Руководство пользователя

Результаты поиска

Содержание GT-8

Отзывы:

Похожие инструкции для GT-8

Бренды по названию

Популярные бренды