70
Chapter 7 Other Features
Adjusting the Display
Contrast (LCD Contrast)
Depending on where the GT-8 is placed, the display (on the
right) may become difficult to read. If this occurs, adjust the
display contrast.
fig.07-151
1.
Press [SYSTEM], then press PARAMETER [
]
[
] so that “SYS: LCD Contrast” is displayed.
fig.07-160d
2.
Rotate the PATCH/VALUE dial to adjust the contrast.
Valid Settings: 1–16
3.
Press [EXIT] to return to the Play screen.
Adjusting the Tone to Suit
the Guitar Being Used
The GT-8 includes a function used for adjusting the tone to
match the connected guitar.
This is effective when you are connecting a different guitar
from the one used when the patch was created.
When adjusting the input level and input presence, the
input signals for all patches are affected. Note that the
nuances of the effect sounds that occur in response to
guitar volume may change, particularly with patches in
which effects are controlled by the guitar volume.
fig.07-041
1.
Press [SYSTEM], then press PARAMETER [
]
[
] to display the following screen.
fig.07-050d
2.
Rotate the PATCH/VALUE dial to change the setting’s
value.
3.
Repeat Steps 1 and 2 as needed.
4.
Press [EXIT] to return to the Play screen.
1
2
1
3
Parameter/
Range
Explanation
Input Level
-20 dB–+20 dB
Adjusts the guitar input level.
Input Pres. (Input Presence)
-20 dB–+20 dB
Adjusts the tonal quality of the guitar’s high
end.
1
2
1
4
GT-8_e.book 70 ページ ２００７年６月２９日 金曜日 午後３時５５分
