Roland EGX-350, Руководство пользователя

Страница: 66 / 124

64
Chapter 4 Engraving
4-5 Cutter Installation Method 2 (No Nose Unit)
3.
Make the settings for spindle speed and Z-axis control.

Press several times to display the screen shown at left.
Use
and to select [OTHERS].
Press .

Use to select “ON.”
Press to confirm.

Press .
Use to select “OFF.”
Press to confirm.
The message shown at left is displayed for three seconds, and then the original
screen returns.

Press several times to return to the main screen.
4.
Install the cutter and set the Z-axis origin point.

Use , , , and
to move the spindle head to the area
above the workpiece, then press
to lower the spindle head.
Stop at a position where the tip of the solid collet
is approximately 10 millimeters from the surface
of the workpiece.

P. 44, “Manual Movement”
Workpiece
Solid collet