Roland EGX-350, Руководство пользователя

Страница: 64 / 124

Chapter 4 Engraving
62
4-5 Cutter Installation Method 2 (No Nose Unit)
Installing a Character Cutter (With No Nose Unit)
WARNING
Never inadvertently touch the computer or handy panel while performing this
task.
Unintended operation of the machine may result in injury.
WARNING
Securely fasten the cutting tool and in place. After securing in place, make sure
no wrenches or other articles have inadvertently been left behind.
Otherwise such articles may be thrown from the machine with force, posing a risk
of injury.
CAUTION
Caution: cutting tool.
The cutting tool is sharp. To avoid injury, exercise caution.
Type of cutter used Character cutter or flat cutter
Nose-unit usage Not Used
Suitable workpiece types Aluminum, brass
Automatic Z-axis control Off
Spindle rotation On
Lock-lever position
This performs engraving without using the nose unit. This method doesn’t scrape the surface of the workpiece, so you can
also use it with materials such as aluminum or brass. Note, however, that the Z-axis origin point is fixed and unchanging, so
in order to obtain a uniform cutting-in depth, the thickness of the workpiece must also be uniform.
1.
Install the cutter holder and solid collet.

Install the cutter holder.
While holding the spindle unit immobile with
a wrench, tighten the cutter holder.
The cutter holder is reverse-threaded (that is, you
turn it counterclockwise to tighten it). Be careful
to turn it in the correct direction.
Wrench
Spindle unit
Cutter holder
Loose
Hexagonal
screwdriver
Cutter holder