Roland EGX-350, Руководство пользователя

Страница: 44 / 124

3-3 Using the Handy Panel
Display screen
Menus, messages, and the like are
displayed here.
Dial
This adjusts the spindle’s speed of rotation.
Indication used in this manual:

P. 48, “Adjusting the Spindle Speed”
MENU Button
Pressing this changes the menu screen.
Also, pressing this when at the origin-
setting menu returns the screen to the
coordinate display view (the main menu).
Indication used in this manual:
Enter/Pause button
This executes a selected on-screen item or
confirms a selected item or value.
Confirming an item or value displays the
setting enclosed between angled brack-
ets (“<>”). Pressing this during engraving
pauses operation and displays the Pause
menu.
I ndication used in this manual:
Spindle button
Holding this down for one second or lon-
ger while the spindle is stopped makes
spindle rotation start. Pressing this during
spindle rotation makes the rotation stop.
(When rotation is stopped, holding the
button down for one second or longer is
not necessary.)
Indication used in this manual:

P. 47, “Starting and Stopping Spindle
Rotation”
X/Y-axis Origin Set button
This sets the reference point for the cutting
position.
Indication used in this manual:

P. 75, “Setting the XY Origin Point (Home
Position)”
Z-axis Origin Set button
This sets the reference point for the cutting
position.
Indication used in this manual:

P. 62, “Cutter Installation Method 2,” p. 71,
“Cutter Installation Method 4”
Copy button
This calls up the menu for the copy fea-
ture.
Indication used in this manual:

P. 78, “Executing Repeated Cutting”
Movement buttons
These move the cutter forward and backward, and to
the left and right. You also use them to select items
and change settings at menu screens.
Indication used in this manual:

P. 44, “Manual Movement”
Z-axis Movement buttons
These move the cutter up and down.
Indication used in this manual:

P. 44, “Manual Movement”
Feed button
Pressing a Movement or Z-axis Movement
button while holding down this button
makes the tool move rapidly.
Indication used in this manual:

P. 44, “Manual Movement”
Chapter 3 Basic Operation
42