82
Sounding the Metronome
(continued)
4
Specifying which beats are emphasized.
fig.menu-metro05-e.eps
Use the [
] [
] buttons to choose “Beat.”
Use the [+] [-] buttons to specify the timing at which
the metronome will mark the strong beats.
*
(a quarter-note) will be counted as one beat.
* If you’ve selected “Voice” as the “Sound” setting, there will be no accent on the strong beats.
5
Adjust the volume.
fig.menu-metro05-e.eps
Use the [
] [
] buttons to choose “Level.”
Use the [+] [-] buttons to adjust the metronome volume
as desired.
6
Adjust the output destination.
Use the [
] [
] buttons to choose “Monitor.”
Use the [+] [-] buttons to specify the output destination.
7
Press the [EXIT] button.
You’re returned to the audio source screen.
Value
Explanation
0
No beats are emphasized.
1
Every beat is emphasized.
2
Every second beat is emphasized.
3
Every third beat is emphasized.
4 (factory setting)
Every fourth beat is emphasized.
5
Every fifth beat is emphasized.
6
Every sixth beat is emphasized.
7
Every seventh beat is emphasized.
Each beat is divided into a triplet, and an emphasized beat will sound
at the beginning of each triplet.
Each beat is divided into sixteenth notes, and an emphasized beat will
sound on the sixteenth note at the beginning of each beat.
Value
Explanation
All
Output to speakers, headphones, and all outputs.
Phones
Output only to headphones.
●
The metronome sound will not be audible during recording standby or while recording.
If you want to hear the metronome, you’ll need to use headphones.
●
The metronome cannot be used while overdubbing a performance with a music CD (
☞
Important
Turn the metronome on/off.
Specify the metronome tempo.
Make the tempo faster.
Make the tempo slower.
Remote operations
CD-2u_SD-2u_e.book 82 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
