Layering Your Performance onto an SD Memory Card Song and Recording It
(continued)
61
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
7
Press the [
] (Play) button to begin recording.
When the SD memory card song you selected in Step 4-
begins playing, recording
on the SD memory card will begin simultaneously. Start your performance.
fig.overdub-SD03.eps
8
Press the [
] (Stop) button to stop recording.
The recorded song will be added to the end of the SD memory card. If you want to listen
to the song you recorded, press the [
] (Play) button immediately after you stop
recording.
fig.overdub-SD03.eps
Lit
During recording, the upper right
of the screen will show “SD
→
SD.”
Remote control
Remote control
●
“Key” (Page 75), “Pitch” (Page 76), and “Speed” (Page 77) settings will automatically
revert to the values of the original song only during recording. When recording ends,
these settings will return to the values you specified.
●
Sound will not be produced from the speakers while in recording-standby mode or while
recording. If you want to listen to the sound that’s being recorded, you’ll need to use
headphones. (Refer to Step 4 on Page 41.)
●
The playback level (“SD/CD Level”) setting is common to the CD and the SD memory
card. When you turn off the power, this setting will return to “0.”
●
If you decide to stop recording midway through the track, press the [
] (Stop) button.
Important
CD-2u_SD-2u_e.book 61 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
