98
Selecting Songs from an SD Memory Card to Create a CD
(continued)
“WAV 16-bit” and “44.1 kHz” is supported
If you want to create a music CD using songs that were recorded on an R-09, you must
set the R-09’s recording mode to “WAV 16-bit” and sampling frequency to “44.1 kHz”
before you record.
Requirements for songs (files) that can be recognized
CD-2u/SD-2u recognizes song files that were recorded with a recording mode of “WAV
16bit” and a sample rate of “44.1kHz,” and that meet all of the following conditions.
●
Track length must be longer than four seconds.
●
Track title must not contain double-byte characters (e.g., Japanese).
●
Track (file) must be located in the root directory of the SD memory card.
* The CD-2u/SD-2u is able to display and play back a maximum of 99 tracks.
* The CD-2u/SD-2u will not recognize the file if even one of the above conditions is not met.
File name display
fig.WriteCD03-e.eps
If the song was recorded on the Roland R-09 series,
the song name (file name) will be displayed in Step
5 of Page 95.
fig.WriteCD02-e.eps
Even if a song recorded on a device such
as the Roland R-09 series is too large to fit
on a single CD-R/RW disc, it can
automatically be divided across multiple
CD-R/RW discs.
If you want to automatically divide a large
song and write it across multiple discs,
make the following setting in Step 5 on
Page 95.
In Step 5 (Page 95), specify the large song as the “first” of the songs you want to write.
The song will be divided automatically only if the song you specify as the first song is larger than
a single CD-R/RW disc. In this case, you won’t be able to specify additional songs to be added.
After the first CD-R/RW disc has been ejected, the message “Insert Disc” will appear. Insert
another CD-R/RW disc. When the disc is detected, writing will begin automatically.
Continue inserting additional CD-R/RW discs as directed by the messages that appear.
When all the data has been written, the message “Write Completed. Another Disc?” will appear.
Continue with the procedure from Step 10 of Page 97.
* CD-R/RW discs that have no more space on them after the track has been written will be
finalized automatically. For example, if a track is divided across two discs, as in the example
shown in the illustration at the upper right, the first CD-R/RW disc will be finalized
automatically.
Making a music CD from a song recorded on a device such as the Roland R-
05/R-09 series
Creating a music CD of a song that won’t fit on a single CD-R/RW disc
First CD-R/RW disc
Second CD-R/RW disc
Track
Portion that does not fit
on first CD-R/RW disc
Automatically
divided
CD-2u_SD-2u_e.book 98 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
