Roland CD-2u, Руководство пользователя

Страница: 50 / 140

50
Recording an Electronic Instrument
Here’s how to connect an electronic instrument such as a digital piano or keyboard, and
record your performance.
4
Connect the CD-2u/SD-2u’s LINE IN (L, R) jacks to your electronic
instrument (digital piano, keyboard, etc.).
Use audio cables to connect the CD-2u/SD-2u’s LINE IN (L, R) jacks to the output jacks
of your electronic musical instrument.
fig.connect-piano-e.eps
* Refer to the owner’s manual of your electronic musical instrument for the appropriate type of
plug to use.
5
Turn the [LINE] knob to adjust the input level at the LINE IN (L, R) jacks.
Adjust the loudness of the sound you’re recording. Since you’re not using the mic input,
set the [MIC LEVEL] switch to the “MANUAL” position, and then turn the [MIC] knob all
the way to the left (off).
While producing the sound that you will actually be recording, turn the [LINE] knob to
adjust the input level.
Adjust the level so that the PEAK indicator located above the [LINE] knob lights briefly
at the loudest moments of the performance you’ll be recording.
* When using the [MIC] knob or [LINE] knob, you might hear a slight noise when the recording
level changes; this does not indicate a malfunction.
fig.rec-line-e.eps
If you’re Recording to an SD
Memory Card If you’re Recording to a
CD-R/RW Disc
1
Turn on the power
(
☞
Page 22, 24)
.
1
Turn on the power
(
☞
Page 22)
.
2
Insert the SD memory card
(
☞
Page 26).
2
Insert the CD
(
☞
Page 29).
3
Set the audio source to “SD”
.
Press the [SD CARD] button so it’s lit.
fig.selectCD-e.eps
3
Set the audio source to “CD.”
Press the [CD] button so it’s lit.
fig.selectSD-e.eps
CD-2u/SD-2u: RCA phono type
Electronic musical instrument: RCA phono type or phone type
Types of plugs that can be connected
To the output jacks of your
electronic musical instrument
R L
Louder Quieter
At this position
PEAK indicator
The level meter will move according
to the level of the audio input.
CD-2u_SD-2u_e.book 50 ページ ２０１３年１月２４日 木曜日 午前１１時３４分