13
IMPORTANT NOTES
(continued)
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
551-edit
●
Please be aware that the contents of memory can be
irretrievably lost as a result of a malfunction, or the
improper operation of the unit. To protect yourself against
the risk of loosing important data, we recommend that you
have written down on paper (when possible).
552
●
Unfortunately, it may be impossible to restore the contents
of data that was stored in the unit’s memory, SD cards, or
SDHC cards once it has been lost. Roland Corporation
assumes no liability concerning such loss of data.
553
●
Use a reasonable amount of care when using the unit’s
buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.
554
●
Never strike or apply strong pressure to the display.
556
●
When disconnecting all cables, grasp the connector itself—
never pull on the cable. This way you will avoid causing
shorts, or damage to the cable’s internal elements.
558
●
To avoid disturbing others nearby, try to keep the unit’s
volume at reasonable levels.
559a
●
When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise,
you will need to use equivalent packaging materials.
562
●
Some connection cables contain resistors. Do not use
cables that incorporate resistors for connecting to this unit.
The use of such cables can cause the sound level to be
extremely low, or impossible to hear. For information on
cable specifications, contact the manufacturer of the cable.
567-edit
●
When opening/closing the CD drive
, please be
careful not to get your fingers pinched between the
movable part and the panel. In places where small
children are present, make sure that an adult provides
supervision and guidance.
708-edit
●
Please observe the following precautions when handling
SD cards and SDHC cards.
❍
Do not remove the device while reading/writing is in
progress.
❍
To prevent damage from static electricity, discharge all
static electricity from your person before handling the
device.
❍
Avoid touching the terminals and protect them from
contact with metallic objects. Make sure they stay clean.
❍
Do not bend, drop, or apply strong force to the device.
❍
Do not leave the device where it can be subjected to
direct sunlight. Do not leave the device in locations
such as a closed vehicle.
❍
The device must not get wet.
❍
Do not disassemble or modify the device.
930a-edit
●
Never turn off the power or disconnect the SD cards or
SDHC cards while the display indicates “Processing...”
add
●
All SD cards and SDHC cards eventually wear out. We
recommend that you consider the SD card and SDHC
card not as a permanent storage site, but as a place to
store data temporarily. We also recommend that you back
up important performance or data that cannot be
recorded again onto the another media that is supported
by your unit.
C-01
●
It is forbidden by law to make an audio recording, video
recording, copy or revision of a third party’s copyrighted
work (musical work, video work, broadcast, live
performance, or other work), whether in whole or in part,
and distribute, sell, lease, perform, or broadcast it without
the permission of the copyright owner.
●
Do not use this product for purposes that could infringe
on a copyright held by a third party. We assume no
responsibility whatsoever with regard to any
infringements of third-party copyrights arising through
your use of this product.
2a-2
●
MMP (Moore Microprocessor Portfolio) refers to a patent
portfolio concerned with microprocessor architecture,
which was developed by Technology Properties Limited
(TPL). Roland has licensed this technology from the TPL
Group.
2a-3
●
Fugue © 1999–2013 Kyoto Software Research, Inc. All
rights reserved.
2a-10
●
The SD logo (
) and SDHC logo (
) are
trademarks of SD-3C, LLC.
2a-17
●
This product contains eCROS integrated software platform
of eSOL Co.,Ltd. eCROS is a trademark of eSOL Co., Ltd.
in Japan.
3a
●
Roland is a registered trademark or trademark of Roland
Corporation in the United States and/or other countries.
4 T-01
●
Company names and product names appearing in this
document are registered trademarks or trademarks of their
respective owners.
552
●
The CD-2u/SD-2u’s CD-writing functionality, and its
backing-up functionality are designed to allow you to
reproduce material to which you have copyright, or
material which the copyright owner has granted you
permission to copy. Accordingly, reproduction of Music CD
or other copyrighted material without permission of the
copyright owner avoiding technical prohibiting features of
second-generation and later copying like SCMS or others
constitutes copyright infringement and may incur penalties
even in case such reproduction is for your own personal use
and enjoyment (private use). Consult a copyright specialist
or special publications for more detailed information on
obtaining such permission from copyright holders.
Additional Precautions
Copyrights / Licenses / Trademarks
About the Licenses Agreement
CD-2u_SD-2u_e.book 13 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
