Recording Acoustic Instruments or Vocals
(continued)
47
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
7
Press the [
] (Record) button to enter recording-standby mode.
fig.rec-intmic04-e.eps
8
Press the [
] (Play) button to begin recording.
Start your performance.
fig.rec-intmic05-e.eps
9
Press the [
] (Stop) button to stop recording.
fig.rec-intmic06-e.eps
The recorded song will be added to the end of the SD memory card or CD-R/RW disc.
If you want to listen to the song you recorded, press the [
] (Play) button
immediately after you stop recording.
Blinking
Remote control
Lit
Remote control
Remote control
●
Sound will not be produced from the speakers while in recording-standby mode or while
recording. If you want to listen to the sound that’s being recorded, you’ll need to use
headphones. (Refer to Step 4 on Page 41.)
●
Howling could be produced depending on the location of microphones relative to
speakers. This can be remedied by:
- Changing the orientation of the microphone(s).
- Relocating microphone(s) at a greater distance from speakers.
- Lowering volume levels.
●
When turning the [MIC] knob, you may hear a faint noise when the input level changes,
but this is not a malfunction.
Important
If you’ve finished recording a CD-R/RW disc and would like to play that disc on another CD
player, you’ll need to execute the “Finalize” operation. You can finalize the CD-R/RW disc
when ejecting it. For details, refer to “Making a CD-R/RW Disc for Playback on Another CD
Player (Finalize)” (Page 99).
Important
CD-2u_SD-2u_e.book 47 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
