4.4.3 Reply
Commands
ack/OK
Reply signifying normal operation
Function: Reply signifying normal operation
Syntax:
ack
(RS-232C, Command format: Type 0)
Syntax:
OK
(Telnet, Command format: Type 0)
ER
Replies When an Error Has Occurred
Function: Reply signifying occurrence of a problem
Syntax:
stxER:a;
(RS-232C, Command format: Type 2)
Syntax:
ER:a
(Telnet, Command format: Type 2)
a: Error number
0 Syntax error
This error occurs when correct reception was not possible, such as when the syntax
of the command was incorrect or inappropriate.
1 The specified phrase does not exist, or the phrase number is incorrect. This error
will also be output if a phrase number is specified for a card which is not inserted.
2 Busy error. The AR-3000SD is currently recording or playing back. When the
AR-3000SD is recording or playing back, it will process only the following
commands.
Control
Commands
Request
Commands
During Playback
PA, ST, PE, PLL, PLR, FP, FPB AC
During Play Pause
PA, ST, PE, RL
AC
During Recording Standby PE, ST
AC
During Recording
PA, ST, PE
AC
During Recording Pause
PA, ST, PE
AC
3 An editing command was received when the AR-3000SD was not in Delete mode.
4 This error occurs if a setting/delete/record command is transmitted while the write
protect switch of the card is ON.
5 This error occurs when the total number of phrases specified by the PA, PU, or CE
commands exceeds the maximum value (100), or when the specified parameter
value is outside of the limit of the maximum value.
6 This error occurs when the characters being set for a phrase name or card name
exceed the maximum value.
7 This error occurs when characters other than numerals (0 - 9) are used to specify
an integer.
8 This error occurs when you attempt to specify a previously recorded phrase as a
pattern phrase.
9 This error occurs when you attempt to record or copy a phrase on an already
recorded phrase.
10 There is no remaining card capacity.
20 The command could not be executed for some other reason.
21 Unsupported card or incorrect format. Please change cards or format card. Format
the card by panel operation.
100 The AR-3000SD received a 2Q or 3Q command even though the specified phrase
was not a pattern phrase.
101 A PQ, QQ or TQ command is used to request output even after the setting
information of the last phrase has been output.
102 The AR-3000SD received an RE command even though it was not in recording
standby mode.
202 There is no time information for the specified phrase.
300 The command is not compatible with the Dual Mono mode.
301 Specify a time parameter within the phrase recording time.
302 Phrases other than audio phrases cannot be specified.
AR-3000SD (Ver.1.00) Command Reference - 69
