TO
Login timeout setting
Function: Login timeout setting
Syntax:
TO:a
(Telnet, Command format: Type 2)
a: Time Out On/Off
0
Off
1
On
* AR-3000SD dose not log out automatically.
TP NTP
Setting
Function: NTP
Setting
Syntax:
stxTP:a;
(RS-232C, Command format: Type 2)
Syntax:
TP:a
(Telnet, Command format: Type 2)
a: IP address setting
(0.0.0.0--255.255.255.255)
SC
Programmable Timer Setting
Function: Programmable Timer Setting
Syntax:
stxSC:a,”b”;
(RS-232C, Command format: Type 2)
Syntax:
SC:a,”b”
(Telnet, Command format: Type 2)
a: Set/write
0
Set
1
Write
b: When 0 is set for a
Sets a text string for 1 line in the programmable timer settings file (_AR3TCAL.INI).
When 1 is set for a
Type in a space.
4.2.4 Request
Commands
AQ
Reset the Phrase Output Counter
Function: Reset the Phrase Output Counter
Syntax:
stxAQ:a;
(RS-232C, Command format: Type 2)
Syntax:
AQ:a
(Telnet, Command format: Type 2)
a: Card in slot
0 Card in slot A
1 Card in slot B
2 Card in slot C
3 Card in slot D
Note:
This sets the Phrase Output Counter to the lowest-numbered phrase of the phrases
registered in the card. Use this command before you wish to output the settings of all
phrases by using the QQ command, for example when you confirm the initial settings.
AR-3000SD (Ver.1.00) Command Reference - 54
