RS Start
Recording
Function1: Start Recording (without Specifying the Recording Phrase)
Syntax:
stxRS;
(RS-232C, Command format: Type 1)
Syntax:
RS
(Telnet, Command format: Type 1)
Note:
The AR-3000SD starts recording immediately when it receives RS command. However,
when you have made the trigger recording setting, the waits for audio input higher than
the trigger level (the volume level at which recording starts), then starts recording. (It is
not necessary to send an RE command. Levels in trigger recording settings may change
depending on the immediately preceding recording action and the card settings.)
The phrase number is automatically assigned to a free number where nothing is recorded.
Use the ST command to stop recording.
Also, the AR-3000SD automatically returns the total number of phrases recorded on the
card when it receives an AE command. (Refer to 4.4.1 AE command)
Function2: Start Recording (with Specifying the Recording Phrase)
Syntax:
stxRS:a;
(RS-232C, Command format: Type 2)
Syntax:
RS:a
(Telnet, Command format: Type 2)
a: Phrase number
Note:
The AR-3000SD starts recording immediately when it receives RS command. However,
when you have made the trigger recording setting, the waits for audio input higher than
the trigger level (the volume level at which recording starts), then starts recording. (It is
not necessary to send an RE command. Levels in trigger recording settings may change
depending on the immediately preceding recording action and the card settings.)
The phrase number is automatically assigned to a free number where nothing is recorded.
Use the ST command to stop recording.
Also, the AR-3000SD does not return the total number of phrases recorded on the card
when it receives RS command with Specifying the Recording Phrase.
Control
VL
Play Volume Control
Function: Play
Volume
Control
Syntax:
stxVL:a;
(RS-232C, Command format: Type 2)
Syntax:
VL:a
(Telnet, Command format: Type 2)
a: Play Volume % (10 - 100)
OB BUSY
Control
Function: BUSY
Control
Syntax:
stxOB:a;
(RS-232C, Command format: Type 2)
Syntax:
OB:a
(Telnet, Command format: Type 2)
a: BUSY
0
OFF
1
ON
AR-3000SD (Ver.1.00) Command Reference - 39
