Rohde & Schwarz ZNL Series, Руководство пользователя

Страница: 36 / 240

Configuration
R&S
®
ZNL
36 User Manual 1178.5989.02 ─ 06
State ..............................................................................................................................36
Continuous Value Update ............................................................................................ 36
Select ............................................................................................................................ 36
Zeroing Power Sensor ................................................................................................. 37
Frequency Manual ....................................................................................................... 37
Frequency Coupling ..................................................................................................... 37
Unit/Scale .....................................................................................................................37
Meas Time/Average ..................................................................................................... 38
Setting the Reference Level from the Measurement Meas -> Ref ............................... 38
Reference Value ...........................................................................................................38
Use Ref Level Offset .................................................................................................... 38
Average Count ( Number of Readings ) ........................................................................38
Duty Cycle ....................................................................................................................39
State
Switches the power measurement for all power sensors on or off. Note that in addition
to this general setting, each power sensor can be activated or deactivated individually
by the
Select setting on each tab. However, the general setting overrides the individual
settings.
Remote command:
[SENSe:]PMETer<p>[:STATe]
on page 118
Continuous Value Update
If activated, the power sensor data is updated continuously during a sweep with a long
sweep time, and even after a single sweep has completed.
This function cannot be activated for individual sensors.
Remote command:
[SENSe:]PMETer<p>:UPDate[:STATe]
on page 118
Select
Selects the individual power sensor for usage if power measurement is generally acti-
vated (
State function).
Receiving Data Input and Providing Data Output