Rohde & Schwarz FSMR series, Начало работы

Страница: 88 / 131

R&S FSMR
Setting Parameters
1166.3363.12 3.15 E-1
3. Various softkeys act like selection
switches. Only one softkey may be
active at a time.
Example: sweep setting
¾
Press SWEEP key.
¾
Press CONTINUOUS SWEEP softkey.
The continuous sweep is thus set. The CONTINOUS
SWEEP
softkey is colored (factory-set: green). The
second alternative, a s eries of n s weeps according to
the trigger definition, can be s elected via the SINGLE
SWEEP softkey in the s ame menu. Only one of the two
softkeys can be ac tive at a time, the softkeys thus act
like selection switches.
CONTINUOUS
SWEEP
SINGLE
SWEEP
CONTINUOUS
SWEEP
SINGLE
SWEEP
4. The softkey is used to select the
parameter, the setting is made in
an alphanumeric data entry
window.
Example: SWEEP COUNT parameter
¾
Press SWEEP key
¾
Press
SWEEP COUNT
softkey.
The window for entering the num ber of sweeps for the
SINGLE SWEEP mode is opened. T he softkey is
colored (factory-set: red). (Data entry is described in the
next section).
SWEEP
COUNT
SPAN
100
SWEEP COUNT