Rohde & Schwarz FSMR series, Начало работы

Страница: 82 / 131

R&S FSMR
The Screen
1166.3363.12 3.9 E-1
Full Screen
In the full-screen mode, the settings and measurements are performed in the active visible window. All
indications on the s creen refer to this window. The designation (SCREEN A or SCREEN B) is inserted
as enhancement label A or B on the right diagram margin.
Switching between the w indows is by means of SCREEN A/B hotkey. The current measurement is
terminated when its window is blanked out.
Switching from split-screen to full-screen mode is performed in menu
DISP
.
Split Screen
In Split Screen mode, the screen is divided into two halves.
Fig.3-4 Subdivision of the screen in Split Screen mode
The upper half is assigned Screen A, the low er one Screen B. The settings for measurement can be
selected independently for both s creens. E.g., a s pectrum may be displayed in Screen A and a time
amplitude in the time range is displayed in Screen B.
The indications which are valid only for one window appear in the m argin of the associated diagram.
Indications which are valid for the two windows are displayed between the diagrams.
The window for entry of the m easuring parameters or the m arker operation is selected using the
SCREEN A/B hotkey. The measurements are simultaneously performed in the two windows irrespective
of the currently active one.
Switching from full-screen to split-screen mode is performed in menu DISP .