Rohde & Schwarz FSMR series Скачать руководство пользователя страница 44

Страница: 44 / 131

R&S FSMR

Connecting a Printerr

1313.9617.12

1.33

E-2

Turn the spinwheel to select the directory

and path D:\I386 and press it to confirm

the selection.

If the selected item is not printed on a blue

background, it must be marked with the

cursor up / down keys before it can be

activated by pressing the spinwheel.

Select the driver file with the spinwheel

and confirm by pressing the spinwheel.

The file is included in the

Files Needed

dialog.

Note:

If  the  desired  file  is  not  in  the  D:\I386
directory,  a  disk  with  the  driver  file  is
needed.  In  this  case,  exit  the  dialog  with
ESC and repeat the selection starting from
the "Files needed" dialog.

Select the

button with the spinwheel

and press the spinwheel to confirm.

The installation is completed.

Finally, the instrument must be configured for printout with this printer using the softkeys

DEVICE

SETUP

and

DEVICE 1/2

in the hardcopy main menu (see section "Selecting a printer").

Содержание FSMR series




































































































































Результаты поиска

Содержание FSMR series

Отзывы:

Бренды по названию

Популярные бренды

Rohde & Schwarz FSMR series, Начало работы

Результаты поиска

Содержание FSMR series

Отзывы:

Бренды по названию

Популярные бренды