Rohde & Schwarz FSMR series Скачать руководство пользователя страница 37

Страница: 37 / 131

Connecting a Printer

R&S FSMR

1313.9617.12

1.26

E-2

DEVICE

SETUP

Press the

DEVICE SETUP

softkey.

The

HARDCOPY SETUP

table opens

and

displays the selection of output formats.

The current selection

"Clipboard"

highlighted and marked with a dot in the

option button.
Use the cursor key

to move the

selection bar to

"Printer"

and press

ENTER.

Windows for selecting a printer (Name),

printing to file (Print to File) and selecting

printout orientation (Orientation) are

displayed.

Use the cursor key

to set the selection

bar to

"Name"

and press

ENTER

The list of available printer types appears.

Use the cursor key

or the

spinwheel to move the selection bar to the

"HP DeskJet 660C" printer and press

ENTER.

The list closes and the selected printer

appears in the "Name" field.

Note:

If the desired printer is not available in the

selection list, its driver must first be

installed.

For further information, see sections

"Installation of Plug&Play Printers",

"Installation of Non-Plug&Play Printers"

and "Installation of Network Printers".

Содержание FSMR series




































































































































Результаты поиска

Содержание FSMR series

Отзывы:

Бренды по названию

Популярные бренды

Rohde & Schwarz FSMR series, Начало работы

Результаты поиска

Содержание FSMR series

Отзывы:

Бренды по названию

Популярные бренды