Installation and Operation Manual 90DIB500IM02 – 5.2
13
DIB-500 R4.1
Notes on the Document
Figures and special notations used
Carry out the following steps:
➔
Description of an individual work step.
➥
A possible result of the work step just performed.
1. Description of the first of multiple work steps.
➥
A possible result of the work step just performed.
2. Description of the second work step.
✓
Confirmation: Results of the entire sequence of actions.
1.5.2.3
Safety instructions used
Safety instructions in this document point to a hazard that may put persons or the prod-
uct/system at risk.
Safety instructions will point out:
|
the nature of the hazard,
|
the source of the hazard,
|
measures to be taken to avert the specified hazard.
Shown below are four safety advice symbols which indicate the severity of the danger
by means of different keywords (danger, warning, caution, attention). The symbols
shown may vary depending on the nature and source of the danger.
This symbol identifies safety instructions. You are warned of an imminent dan-
ger for the life or health of persons.
➔
The arrow identifies a precautionary measure designed to avert this danger.
This symbol identifies safety instructions. You are warned of a potential hazard
for the life or health of persons.
➔
The arrow identifies a precautionary measure designed to avert this danger.
This symbol identifies safety instructions. You are warned of a potentially haz-
ardous situation for the life or health of persons.
➔
The arrow identifies a precautionary measure designed to avert this danger.
