DIB-500 R4.1
Transport and storage
Storage
142
Installation and Operation Manual 90DIB500IM02 – 5.2
✓
Appropriate means of transportation must be available, e.g. a lift truck.
✓
The transport must be performed by at least two people.
✓
The equipment rack must be bolted to a pallet.
Carry out the following steps:
The equipment rack may tip over during transportation. The product can be dam-
aged.
➔
Ensure that the product is bolted to a pallet before transporting the equipment rack,
e. g. with a lift truck.
➔
When transporting on a lift truck ensure that the ground is suitable for transportation.
➔
When transporting, ensure that no lateral tilt of the equipment rack will occur.
1. Load the equipment rack onto the means of transportation with two persons.
2. Use the means of transportation to transport the equipment rack to the intended
installation site/operating room.
✓
You have successfully transported the equipment rack.
Transport using vehicles
To avoid damage caused by vibrations, ensure that the equipment rack is packaged and
secured appropriately when transporting it.
9.2 Storage
The product must be stored in closed rooms that are dry and weatherproof . In addition,
this room must meet the required ambient conditions, refer to Table 9.1 on page 141.
