Remote Control
CTS30
1094.0006.30
3.14
E-2
*IDN?
IDENTIFICATION QUERY queries the instrument identification.
The device response is for example:
ROHDE&SCHWARZ,CTSzz,ssssss/sss,x.xx yy.yy.yy
(zz is the model no., eg 55 or 65
ssssss/sss is the serial no., eg 101183/005
x.xx is the software version, eg V 1.00
yy.yy.yy is the date, eg 18.10.93)
*IST?
INDIVIDUAL STATUS QUERY returns the contents of the IST flag in decimal form (0 | 1). The IST-
flag is the status bit which is sent during a parallel poll.
*OPC
OPERATION COMPLETE sets bit 0 in the event status register when all preceding commands have
been executed. This bit can be used to initiate a service request (cf. Section 3.7).
*OPC?
OPERATION COMPLETE QUERY writes message "1" into the output buffer as soon as all
preceding commands have been executed (cf. Section 3.7).
*OPT?
OPTION IDENTIFICATION QUERY queries the options included in the instrument and returns a list
of the options installed. The options are separated from each other by means of commas.
The responses have the following meaning:
B1
OCXO Reference
B7
Module Test
K6
Remote Control
Example of a device response: B1,,B7,,K6