Rohde & Schwarz 1157.3458.02, Руководство по эксплуатации, Страница: 35 / 80

R&S FSH-K1 Command Description
1157.3564.12 29 E-8
CCORRTRACE (Complex Corrected Trace Data)
This command reads out the corrected magnitude and phase values (if applicable) in alphanumeric
format. The magnitude unit is dB, the phase unit is radiants. Dependent on the wrap mode the wrapped
or unwrapped phase values are provided. Phase information is only applicable when vector calibrated
but not in group delay measurement mode.
A complex trace consists of 301 magnitude and 301 phase values.
Example:
get<cr>
0<cr>
ccorrtrace<cr>
‘readout corrected trace data
0<cr>
‘responds parameter ok
-103.22,-106.88,-96.27,.....
Note: This command is only supported in Tracking Generator Measurement.
In Tracking Generator with measurement modes Smith Chart, Phase or Vector Magnitude
the trace will also be sent in unit degrees. First 301 magnitude values and 301 additional
phase values. Phase values are wrapped or unwrapped depending on Wrapphase.
CCORRTRACEBIN (Complex Corrected Trace Data Binary)
This command reads out the corrected magnitude and phase values (if applicable) in binary format.
Dependent on the wrap mode the wrapped or unwrapped phase values are provided. Phase
information is only applicable when vector calibrated but not in group delay measurement mode.
A complex trace consists of 301 magnitude and 301 phase values.
Example:
get<cr>
0<cr>
ccorrtracebin<cr>
‘readout corrected binary trace data
0<cr>
‘responds parameter ok
<
sample
><
sample
>....
Note: This command is only supported in Tracking Generator Measurement.
In Tracking Generator with measurement modes Smith Chart, Phase or Vector Magnitude
the trace will also be sent in unit degrees. First 301 magnitude values and 301 additional
phase values. Phase values are wrapped or unwrapped depending on Wrapphase.