86
Factory Default Combination Settings
The Rodgers T967 is shipped from the factory with default settings on combination memories
M1
,
M2
, and
M3
. Registrations on these memories can be changed, but if the original factory
default settings are desired, they can be restored by performing the following procedure.
Restoring Factory Default Combination Settings
To restore the Factory Default Combination Settings:
1. Press and hold the memory piston to be restored (M1, M2, or M3) for
approximately five seconds. The display shows
LOCKED
or
UNLOCKED
.
2. While holding the memory piston, press and hold SET for an additional five
seconds until the display shows
MEMORY (#) FACTORY DEFAULT
.
3. Release both pistons.
The memory has been returned to factory defaults.
Demonstration Tools
The T967 organ has two demonstration tools which allow you to display the exceptional
functionality and sound quality of your instrument. One of these tools presents the power of the
Rodgers Sound Space
system; the other plays demo songs located in the internal memory of the
organ or on a SmartCard.
Accessing the Rodgers Ambiance Demo
The Ambiance Demo allows you to quickly scroll through a number of preset Room
Modeling examples without affecting the default setting for your instrument. This means the
instrument will return to the normal Room Modeling setting after you exit the Ambiance
Demo screens.
To access the Rodgers Ambiance Demo:
1. Hold General Cancel (‘
0
’) and press
QUICKMENU
. The following screen is
displayed:
Each memory must be individually restored by performing the above procedure.
!