50
Master Volume Control
Special situations and individual preferences sometimes require a temporary change in the
overall volume of the organ. This may be due to an overly large attendance and the need for
additional sound to fill the room; at other times, it may be desirable to reduce the overall level of
the organ to accommodate a smaller audience. These changes are easily accomplished.
Adjusting Master Volume
To adjust Master Volume:
1. Press
the
QUICKMENU
piston.
2. Rotate the Select knob to highlight
Audio Controls
.
3. Press
QUICKMENU
to select the Audio Controls category.
4. Rotate the Select knob to highlight
Master Volume
.
5. Press
QUICKMENU
to select Master Volume. The following screen is
displayed:
A u d i o C o n t r o l s
M a s t e r V o l u m e
0. 0 0
6. Turn the Alpha dial to change the volume level.
Audio Save
Changes made to audio settings are temporary, i.e., they are lost when the organ is turned off. If
desired, however, audio settings can be saved and so that they are retained when the organ is
powered off.
Saving Audio Control Settings
To save the Audio Control Settings:
1. While in any Audio Controls Menu, press and hold
SET
, then press and hold
General Cancel (‘
0
’)for approximately five seconds.
Normally, changes to Master Volume are temporary. However, an Audio Save may be
performed to save this setting as the default. See the next section.
!
