79
When you specify tones by name using either the GM or GS tone maps, the T967
automatically generates the appropriate Program Change and Bank Select messages. This is
a powerful feature, since many different GM and GS Format modules are available.
If you use a module that does not conform to either GM or the GS Format sound set, or goes
beyond the sounds available in those standards, you can set the Tone Names parameter to
OFF. In this case, names will not be displayed and you will be able to manually set the
Program Change, Bank Select MSB and Bank Select LSB when calling up a sound in the
MIDI Coupler Settings screen. In this case, refer to the user manual for your MIDI device to
determine the values to use for each.
Setting the Tone Names Parameter
To set the Tone Names Parameter:
1. Press
the
QUICKMENU
piston.
2. Rotate the Select knob to highlight
MIDI Settings
.
3. Press
QUICKMENU
to select the MIDI Settings category.
4. Rotate the Select knob to highlight
ToneNames
.
5. Press
QUICKMENU
to select the Tone Names category. The following
screen is displayed:
M I D I S e t t i n g s
D e v i c e I D 1 7
T o n e N a m e s
G S
6. Rotate the Alpha dial to select the desired setting (
GS
,
GM
or
Off
).
7. Press General Cancel (‘
0
’) to exit.
A MIDI Save may be performed to save this setting as the default. See MIDI Save on
page 80.
Instead of saving, you may press and hold General Cancel (‘
0
’) and momentarily press
SET
to return MIDI couplers to their defaults. This Reset procedure also returns
Voice Palette selections to their defaults.
!
