Rodgers Trillium T967 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 105

background image

22

Creating new Crescendo Sequences

As stated earlier, there are two Crescendo sequences on the T967, a Standard sequence and an
Alternate sequence. Either or both of these sequences can be changed to suit your particular
needs. The sequences can also be returned to the factory default settings if desired.

Each crescendo has a total of 64

stages

, or steps. Stage 1 is the very first stage activated when

the Crescendo pedal is depressed. As the pedal is opened further, the Crescendo moves
sequentially through the stages until the pedal is completely open and stage 63 is reached.

When creating a new crescendo, it is advisable to first write the new sequence down, then assign
stage numbers from 1 to 63 to each stop or group of stops in the sequence. Sometimes, there are
more stages than stop additions or changes in the sequence, so it is necessary to skip some stages
to make the sequence end at or near stage 63. If this is not done, the sequence ends before the
Crescendo shoe is fully depressed.

Each stop can be turned on at any stage and turned off at any later stage. If a stop is activated at
a particular stage, then it will become active when the Crescendo is used and reaches that stage.
If a stop is retired at a later stage, it will be removed from the sequence when the Crescendo
reaches that stage.

As an example, assume the

SWELL 8' BOURDON

is to turn on at stage 1 and off at stage 25.

At stage 1, you would turn on the

SWELL 8' BOURDON

; at stage 25, you would turn it off.

Unlocking and Locking the Crescendo Sequences

The Crescendo sequences are normally locked to prevent accidental changes, therefore they
must be unlocked before a new sequence can be set. Also, you should lock the Crescendo
sequences after you are finished programming.

To unlock or lock the Crescendo sequences:

1. Press and hold the

ALT CRESC

piston for approximately five seconds until

either

CRESCENDO LOCKED

or

CRESCENDO UNLOCKED

appears in the

display.

2. If the desired setting (Unlocked/Locked) is already selected, release the

ALT

CRESC

piston. Otherwise, continue with step 3.

3. While continuing to hold

ALT CRESC

, rotate the Alpha dial in either direction

to change the setting.

4. Release

the

ALT CRESC

piston.

Setting a New Crescendo Sequence

To set a new Crescendo sequence, first make sure the Crescendo sequences are unlocked
using the procedure above (“Unlocking and Locking the Crescendo Sequences”).

Both the Standard and Alternate Crescendo sequences can be set in the following manner.
Please note, if the

ALT CRESC

piston is

unlit

in step 1, the

Standard

Crescendo will be

selected for programming; if the

ALT CRESC

piston is

lit

in step 1, the

Alternate

Crescendo

will be selected for programming. In other words, the Crescendo which is selected in step 1
will be the one which is modified.

«
...
32
33
34
35
36
...
»

Содержание Trillium T967










































































































Отзывы:

Нет отзывов

Похожие инструкции для Trillium T967

Бренд: ABB Страницы: 8

Бренд: Yamaha Страницы: 2

Бренд: Labom Страницы: 5

Бренд: DAE Страницы: 28

CP-4900 Micro-GC

Бренд: Varian Страницы: 13

Бренд: OBDPROG Страницы: 8

Бренд: Xylem Страницы: 19

Бренд: Nagano Keiki Страницы: 25

Бренд: bmcm Страницы: 5

Бренд: Tektronix Страницы: 48

Бренд: Sur-Gard Страницы: 12

Бренд: Hanna Instruments Страницы: 2

Бренд: Zero 88 Страницы: 32

Бренд: JUMO Страницы: 150

Бренд: Campbell Страницы: 37

Бренд: East Tester Страницы: 36

Бренд: DAPAudio Страницы: 8

Celviano AP-500

Бренд: Casio Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды