32
What’s more, the organ uses its internal memory whenever a SmartCard is not inserted. This
means that a visiting organist who does not have a SmartCard can still use the internal memory
for piston storage when playing for a worship service or concert.
Many of the functions of a SmartCard are accessible via the Console display, however, the
screens only appear if a SmartCard is inserted in the slot. After inserting the card, turn the Select
knob to move between selections in this display and turn the Alpha dial to change the value in a
selection.
The SmartCard slot is located to the left of the coupler rail.
Inserting a SmartCard
To insert a SmartCard so that it can be used:
1. Insert the card firmly in the slot with the gold contacts facing down. The red LED
will light for a few seconds as the contents of the card are loaded into the organ.
Saving to a SmartCard
A new card contains no combination memories. As long as an empty card is inserted in the
T967, the organ uses the internal memory when recalling pistons. As soon as pistons are
saved to the SmartCard, however, the card will be used rather than the internal memory.
To save registrations onto a SmartCard:
1. Select the desired memory level by pressing pistons
M1
,
M2
,
M3
,
M4
,
M5
or
M6
.
2. Set any piston in the normal manner by holding SET, then pressing a combination
piston.
The piston will be saved to the SmartCard, along with all other pistons in the active
memory level.
The contents of the entire memory level (
all
pistons) have now been copied to the
SmartCard. Because the card now contains a copy of the currently selected memory, the
card
memory is now used instead of the
internal
memory from this point. Setting a piston
now affects only the card memory and not the console internal memory. This is true until a
different memory level is selected or until the SmartCard is removed. It is important to
remember the following points:
•
When a SmartCard is in the slot, any memory levels existing on the card replace the
corresponding instrument console internal memory, which is temporarily suspended.
To save internal memory settings to your SmartCard without changing any piston
settings, press a piston to recall its combination, then hold SET, and press the same
piston again. This will transfer the internal memory to the SmartCard.
!
