Rockwell Automation Publication 2198-RM006A-EN-P - December 2020
63
Appendix C Specifications
Control and Auxiliary Power
Specifications
This section provides the control and auxiliary power specifications for the
Ultra3000 and Kinetix 5300 servo drives.
Ultra3000 Servo Drive Auxiliary Power Specifications
Table 47 - Ultra3000 24V Power Supply Requirements for Logic Power
Table 46 - Kinetix 5300 (480V, three-phase) Input Power Specifications (continued)
Attribute
2198-C4030-ERS
2198-C4055-ERS
2198-C4075-ERS
AC input voltage
342…528V rms, three-phase (480V nom)
AC input frequency
47…63 Hz
Main AC input current (rms)
(1)
9.06 A
17.50 A
21.29 A
Max inrush current (0-pk)
30.9 A
30.9 A
46.4 A
Peak AC input current (rms)
23.07 A
39.57 A
49.72 A
Control power input voltage
(2)
21.6…26.4V DC
24V DC nom
Control power input current
(3)
(non-brake motors)
0.9 A
DC
1.7 A
DC
1.7 A
DC
Continuous output current (rms)
11.7 A
22.6 A
27.5 A
Continuous output current (0-pk)
16.5 A
32.0 A
38.9 A
Peak output current (rms)
(4)
34.1 A
58.5 A
73.5 A
Peak output current (0-pk)
48.3 A
82.7 A
103.9 A
Line loss ride through
20 ms
Continuous output power
6.25 kW
12.08 kW
14.70 kW
Internal shunt on
775V
Internal shunt off
765V
Internal shunt resistor
60
Ω
40
Ω
Internal shunt power
50 W
75 W
Bus undervoltage limit
275V
Bus overvoltage limit
810V
Bus capacitance
560 µF
820 µF
1230 µF
Capacitive energy absorption
27.59 J
40.40 J
60.60 J
Efficiency
97%
Short-circuit current rating
200,000 A (rms) symmetrical
(1) Drives are limited to one power cycle per minute.
(2) The cooling fan runs as part of the control power startup routine, when the inverter is enabled, and if the inverter temperature exceeds preset threshold.
(3) For current values when motors include a holding brake, refer to
Kinetix 5300 Servo Drive Control Power Specifications
(4) Peak RMS current allowed for up to 1.0 seconds.
Parameter
Description
Min
Max
Input voltage range
Input voltage range of the external power supply for
drive-mounted breakout boards with 24V to 5V
converter.
18V
30V
Input current
Input current draw from the external power supply for
the drive-mounted breakout boards with 24V to 5V
converter.
—
400 mA
IMPORTANT
A 24V power supply can be used to power the digital I/O and supply 24V
to the drive-mounted breakout boards (catalog numbers 2090-U3CBB-
DM
xx
) provided the cumulative minimum current requirements are met.
