Rockwell Automation Publication 2198-RM006A-EN-P - December 2020
43
Chapter 2 Servo Drive and System Comparisons
Kinetix 5300 Servo System Accessories
The Kinetix 5300 drives include an internal shunt resistor that is connected to
the drive at the factory. External shunt resistors (Bulletin 2198-R
xxx
or 2097-R
x
shunt resistors) can be used to provide additional shunt capacity for
applications when the internal shunt capacity of the drive is exceeded. Catalog
numbers 2198-R014 and 2198-R031 are composed of resistor coils that are
housed inside an enclosure. Catalog numbers 2097-R6, 2097-R7, and 2198-
R001, 2198-R002, 2198-R004 are shunt resistors without an enclosure.
The Kinetix 5300 servo drives have a variety of optional drive accessories. For
details on which accessories are available with each drive, refer to the Kinetix
Motion Accessories Specifications Technical Data, publication
.
Kinetix 5300 Servo systems require controllers, Ethernet switches, and
EtherNet/IP cards, see
for additional information.
RBM interface cables
Motor power, RBM to drive.
2090-UXNRB-10F1P3
2090-UXNRB-8F1P4
2090-UXNRB-6F1P5
External auxiliary
encoder
Allen-Bradley sine/cosine and incremental external
encoders.
Bulletin 842A, 844D, 845H, and
845T
(1) See Rockwell Automation Encompass™ partners for 2098-DSD-HV150 and 2098-DSD-HV220 passive shunt solutions.
The Kinetix 5300 connector kit is included with the drive. Replacement
kits are also available.
Table 36 - Kinetix 5300 Drive System Accessories
Accessory
(1)
(1) Refer to the Kinetix Servo Drives Specifications Technical Data, publication
, for detailed descriptions and
specifications of these drive accessories.
Description
Cat. No.
Low-profile Feedback
Connector kit (required for
flying-lead cables)
Motor feedback connector kit with 15-pin connector plug and
battery backup is required for absolute position. Supports
Kinetix MP, TL, TLP, TLY, LDC, LDL, and LDAT-Series rotary and
linear motors and linear actuators
2198-K53CK-D15M
Motor Power and Feedback
Cables
Refer to the specific drive/motor combination for the motor
cables required for your system
—
Ethernet Cables
(2)
(2) Where
x
equals the cable length in meters.
Ethernet cables are available in standard lengths; Shielded
cable is recommended
1585J-M8CBJM-
x,
1585J-M8UBJM-
x
24V DC Shared-bus
Connector Kits
(zero-stack tab / cutout)
Input wiring connectors and DC bus T-connector for frame 1
and 2 servo drives
2198-H040-
x-x
Input wiring connectors and DC bus T-connector for frame 3
servo drives
2198-H070-
x-x
External Shunt Resistor
(3)
(3) This is an optional accessory. The AC line filters required to meet CE compliance for the Kinetix 5300 are different than those
required by the Ultra3000.
External passive shunts are available to provide additional
shunt capacity for applications where the internal shunt
capacity is exceeded
2097-R
x
and
2198-R
xxx
AC Line Filters
These line filters are required to meet CE requirements
2198-DB08-F
2198-DBR
xx-
F
Table 35 - Ultra3000 Sercos Optional Drive Accessories (Continued)
Drive Accessory
Description
Cat. No.