Rockwell Automation Allen-Bradley PowerFlex 6000 Скачать руководство пользователя | Manualshive

Страница: 8 / 154

background image

8

Rockwell Automation Publication 6000-UM002G-EN-P - August 2022

Preface

Summary of Changes

This publication contains the following new or updated information. This list
includes substantive updates only and is not intended to reflect all changes.

General Precautions

Service and Support

Commissioning Support

After installation, Rockwell Automation is responsible for commissioning
activities for the PowerFlex 6000 product line. Contact your local Rockwell
Automation sales representative to arrange commissioning.

Rockwell Automation support includes, but is not limited to:

•

quoting and managing product on-site startups

•

quoting and managing field modification projects

•

quoting and managing customer in-house and on-site product training

The user or its representatives are responsible for pre-commissioning
activities to prepare the drive for commissioning. Failure to complete these
activities before the commissioning process will delay the startup of the drive.

Topic Page

Updated template

Throughout

Added inclusive language acknowledgment

Updated Figure 17 - Isolation Transformer Temperature Monitors

Updated section HMI

Added section Operator Interface

Updated section Replace the eHIM

Added appendix Spare Parts Storage

ATTENTION:

This drive contains ESD (Electrostatic Discharge) sensitive parts

and assemblies. Static control precautions are required when installing,

testing, servicing, or repairing this assembly. Component damage may result

if ESD control procedures are not followed. If you are not familiar with static

control procedures, reference Allen-Bradley publication 8000-4.5.2, “Guarding

Against Electrostatic Damage” or any other applicable ESD protection

handbook.

ATTENTION:

An incorrectly applied or installed drive can result in component

damage or a reduction in product life. Wiring or application errors, such as,

undersizing the motor, incorrect or inadequate AC supply, or excessive

ambient temperatures may result in malfunction of the system.

ATTENTION:

Only personnel familiar with the PowerFlex 6000 Adjustable

Speed Drive (ASD) and associated machinery should plan or implement the

installation, startup and subsequent maintenance of the system. Failure to

comply may result in personal injury and/or equipment damage.

ATTENTION:

Only qualified personnel with the correct PPE (Personal

Protective Equipment) should service the equipment. Be sure to follow the

safety procedures and local regulations to disconnect the high voltage. After

waiting for 15 minutes, open the cabinet door and verify the absence of

medium voltage on the input, output, and power cell terminals with a high-

voltage detector that is properly rated for the line and motor voltages. All LED

lights on the power cells must be off and the drive be grounded with portable

grounding cables on the input and output before servicing. Failure to follow

the safety procedures can result in severe injury or death.

«
...
6
7
8
9
10
...
»

Содержание Allen-Bradley PowerFlex 6000



























































































































































Отзывы:

Нет отзывов

Похожие инструкции для Allen-Bradley PowerFlex 6000

Бренд: Nastec Страницы: 28

Бренд: Vacon Страницы: 38

Бренд: D+H Страницы: 16

Бренд: GFA Страницы: 21

Бренд: Omron Страницы: 9

300978U - d2 DVD±RW With LightScribe

Бренд: LaCie Страницы: 37

Бренд: Pentair Страницы: 39

Бренд: D+H Страницы: 8

Allen-Bradley Kinetix 3 2071-A10

Бренд: Rockwell Automation Страницы: 134

Бренд: Hitachi Страницы: 13

Бренд: Hitachi Страницы: 15

Бренд: Hitachi Страницы: 15

Бренд: Hitachi Страницы: 57

Бренд: NEC Страницы: 14

CD Recordable/Rewritable Drive CRW8824E

Бренд: Yamaha Страницы: 45

CD REWRITABLE DRIVE CRW8824S

Бренд: Yamaha Страницы: 51

CD Recordable/Rewritable Drive CRW-F1UX

Бренд: Yamaha Страницы: 50

CD Recordable/Rewritable Drive CRW2200

Бренд: Yamaha Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды